Nissan Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
117 Posts
no but some of us are b12 fenatics and want to run the best time. better than the b13 which everyone has. so far i switched my engine to a ga16de then put internals and then turbo now working on sr20det with a t70 turbo. the ga had 367whp dyno tested @ 18psi. we usually like to just give it a little pep so we change to the ga16de from a 91-99 which is a bolton affair with the 89. it has 115hp stock and is decent for a like 80hp car to begin with.
 

·
Registered
Joined
·
117 Posts
yes all you need to do is grind the b12 mount bracket alittle and you can use the same trans or change to manual. mounts bolt right up. unless its 4wd then you would have to use the ga16de head with the ga16i block because the block is a little different
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top