Nissan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
I'm going to buy a '95 300zx vg30dett. Except that the current motor is blown. It's coming with a newer ve30de. I would like to know if:

A: What I would need to salvage from the VG30DETT to put the turbo's on the VG30DE.

B: What the easiest way to swap them out of the car would be.

Any opinion's are greatly apprectiated!

-Chris
 

·
Power FC Z32
Joined
·
2,147 Posts
I'm going to buy a '95 300zx vg30dett. Except that the current motor is blown. It's coming with a newer ve30de. I would like to know if:

A: What I would need to salvage from the VG30DETT to put the turbo's on the VG30DE.

B: What the easiest way to swap them out of the car would be.

Any opinion's are greatly apprectiated!

-Chris
A: Heads (Valves, cams, etc), pistons, injectors, IC track, pcv system, fuel modulator, ECU to name a few.

B: Easiest thing is to buy a TT. Some people have slapped turbos on their NA engine only to find they are still slower then a stock TT.
 

·
Registered
Joined
·
28 Posts
check out this link. This is where I got my motor from. I did have to salvage a few parts off of my old one. The new motor had siezed turbos and a cut harness. So I swapped my turbos and bought a new harness. good as new! I paid $1250 with frieght.

nissan, Shopping Cart
 

·
Registered
Joined
·
2 Posts
1 - 6 of 6 Posts
Top