Joined
·
1 Posts
I have a 1988 300Z and both drive/passenger power windows wont work and neither will the drivers power seat. I tried to see if it might be a fuse, but dont see any associated with them. Any Ideas?
electrical issues?
Join the discussion
Recommended Reading
-
280ZX engine swap into 280Z - throttle linkage woes
General Z DiscussionHello all, I recently had a discount shop swap my 280ZX motor into my 280Z. It runs, but they couldn’t get the throttle linkage right. The pedal sits almost on the floor and there are pieces of wood on the outside firewall keeping the linkage in place. Has anybody done this swap before or have...- 1
- 465
-
joe77 · updated
-
Bluetooth OBD2 scanners???
General Z DiscussionI've been thinking of getting one for a while and they're pretty inexpensive on Amazon, but there's so many of them out there. Have any of you had experience with them and what brand would you recommend? i found this one site in uk near me...- 1
- 420
-
joe77 · updated
-
370Z CONNECTIONS
General Z Discussion2010 nissan 370Z convertible when I took shifter boot OFF TO PLUG IN HAZARD SWITCH NOTICED 2 WIRES LAYING DOWN UNPLUGGED. I PLUGGED THEM BACK IN. WHAT ARE THEY FOR?- 0
- 172
-
BillyHarrison · updated
-
2004 pathfinder Armada break problems
General Z DiscussionThis car has been in my family since it was bought with 8 miles on it. For as long as I can remember about every 5,000 miles the cars brake light on the cluster will come on as if the parking brake is set while you’re driving. Once that happens the pedal has no pressure against it but the brakes...- 1
- 303
Join now to ask and comment!