Nissan Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
Yesterday I was drifting my B13 in some snow (no ebrake, had to use the regular brake) and it dawned on me: It would be nice to have disk brakes!

I was at teh wreckers yesterday, and I actually found a digital dash out of an NX (there are 2 more) I paid $10 for it cuz the casing's all cracked (ill glue it)
I was also looking at the brakes from other nissans... what would bolt up? I mean, I have the GXE so the brakes are drums, but is there a spindle assembly that would just bolt on?
 

· Registered
Joined
·
84 Posts
Discussion Starter · #3 ·
This is the non-abs model. The brake master is tiny on this car... wtf my pony dual tandem is like, twice the length. Then there's a proportioning valve... this sentra has none of that. That's good I bet because I wouldn't have to worry about pressure equalization. How is the sentra split up? 60/40 front/back?

So sentra w/abs? Hmm.... if it's purely a mechanical swap, ill do it. Ebrake doesn't work anyways, don't care if it does it's an auto anyways. What I want to avoid doing is changing drums... although if it goes through pads like my pony then i'd freak!

Is the spindle ass'y the same measurements? Like, will it bolt into the correct spot? I don't want any negative camber!
 

· Registered
Joined
·
84 Posts
Discussion Starter · #6 ·
What is this maxima? What year? I had a '91 so im not up to par with the body styles.

The front right caliper sliding arm is stuck and wears out pads fast... I dug into the metal on that side. I have spare calipers, but camaaaan this is a perfect time to do an upgrade.

Will a NX2000 work?

I'm sure I can get them locally, but I will keep you in mind for the shipping if I break anything and need a part fast! :thumbup:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top