Disabling an immobiliser

1 - 2 of 2 Posts

formula

Guest

Joined Jan 1, 1970

0 Posts

Discussion Starter • #1 • Sep 19, 2002

Got a european 200SX S14 (1995)...

is there any way of disabling the standard immobiliser as its built into the ECU..

perhaps a whole new ECU??

anyone have any ideas??

AznVirus

1.6 Turbo Power

Joined May 8, 2002

718 Posts

#2 • Sep 20, 2002

ya but your speedometer wont work.

1 - 2 of 2 Posts

Recommended Reading

help identify this S14 wing

S14 240SX 1995-1998

I've been searching all night for this wing and the only thing ive seen is a really low res picture on an owner's manual. Its carbon fiber with the side plates looking like shark fins that have covers to the screws to take out the centerpiece of the wing. i guess its part of a sports package but...
- 2
- 306
- DaveyGravy · updated 2 mo ago
Albuquerque Car Meet

S14 240SX 1995-1998

Hey y'all I recently went to a car meet in Albuquerque and saw a mad decent 240SX that was still in good condition. Peep the link
- 0
- 128
- Fawwazlawal · updated 5 mo ago
KA24DE swap to 720, wiring ECU

S14 240SX 1995-1998

Hey guys and gals, I bought my S14 KA24DE swapped '86 720 a few weeks ago and it ran initially, but stopped when the ECU stopped getting power. The engine wiring harness was butchered beyond belief by the previous owner and was the suspected issue right away since many wires were cut or...
- 0
- 756
- A
  alexholl_ · updated 12 mo ago
SR20DET Alternator grounds and other electrical questions.

S14 240SX 1995-1998

Hello, I'm currently having trouble with my battery on my 95 240sx not charging. It has an sr20det blacktop swap out of (i believe) a kouki s14. I recently just swapped alternators and the battery still wont charge so I want to go through all my grounds and check them. I cleaned and reattached...
- 4
- 1K
- T
  theCanucklehead · updated May 10, 2019
Mushy brake pedal after MC replacement

S14 240SX 1995-1998

Have been having non stop issues with my brake booster/master cylinder on my 95 240sx. Pedal was mushy and brakes only engaged in the last inch or so of travel. The car also pulls to the left slightly under hard braking. I replaced the master cylinder a while back, tried to bleed it but ended up...
- 0
- 698
- T
  theCanucklehead · updated May 4, 2019