Nissan Forum banner
1 - 2 of 2 Posts

· Your electrical friend
Joined
·
2,189 Posts
You can get plastic polishing compounds and make your headlights look like new. If they're really bad you can wet sand them with 1000, 1200, 1500, 2000 grit sandpapers then use compounds to finish it off.



Your bumper side marker as well as your corner light don't operate at all, but when you signal the corner light still signals? Like Skyline said, you could have a filament out on the corner light as well as your side marker being out as well, so check that first. If the bulbs are ok, then there is probably a break in the parking light wire. Obviously the break occurred before the lights. The color of the parking light wire that goes to the second filament in your corner lights as well as your side markers is red with a blue stripe. With your lights on, check for voltage at this wire at those two right side parking lights. If no voltage, then you need to find out where the break in the wire is and repair the wire. Good luck with it
 

· Your electrical friend
Joined
·
2,189 Posts
New filaments? You mean new bulbs, you can't "fix" the filaments in a bulb. Just get them at the parts store. If by filaments you thought we meant the sockets that the bulbs plug into, I don't know what you'd do beside get them from a junkyard.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top