Nissan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
2002 sentra se-r with 5 spd. I am almost finished changing my engine from my oil consumption problem and came across a problem. looking from under neath my car below from under the engine & the intake manifold there is a black canister with a bracket that mounts to the intake. on the bracket there is a sensor that is brown and the wire connector(Brown color) that comes off that has another wiring harness connector(gray color 2 wire) that I cant seem to find the sensor that the connector goes too. Does anyone know or can anybody check there car and see if they see the wiring harness I am talking about and tell me where the sensor is. I would really appreciate it.
 

·
Registered
Joined
·
33 Posts
Discussion Starter #2
nevermind everyone. I found out what the sensor is that went there. it is a knock sensor and it is screwed into the block and mounts behind the black canister looking valve below the backside of the intake manifold.
 

·
Registered
Joined
·
430 Posts
i left mine disconnected on a rebuild.

don't like what the sensor does anyways...

it won't really hurt nothin, sides leave the check engine light on.
 
1 - 3 of 3 Posts
Top