[Kirkosaki]

I got a motor, just the motor. no wiring. How can i tell what bore it has without taking the head off and actually measuring it. Are there any tags or markings to indicate whether it's a 1.6 or 1.8 on the Block itself? Not sure what wiring harness to use with this unknown motor. Any help would be great!

Thanks! - Kirk

 

[BeyondBiscuits2]

I think there is a difference in intake manifolds. The CA18DE has the throttle-body positioned like this:

While the CA16DE is like this (GA16 pictured but you get the idea):

 

[Red_Coupe]

should have a a marking on the bell housing part of the engine.. should have CA16 or CA18.. then just look up engine specs that way IMO.

 

[greenbean699]

I think there is a difference in intake manifolds. The CA18DE has the throttle-body positioned like this:

While the CA16DE is like this (GA16 pictured but you get the idea):

actually the ca16de has the same style intake as the ca18de. they have different intake piping but they both come out over the engine.

 

[Kirkosaki]

Isn't the bell housing on the transmission? I'll take a gander at it anyways as well as the intake manifold, They seem identical to me. a closer inspection maybe.. thanks for the help guys!

kirk

 

[greenbean699]

Isn't the bell housing on the transmission? I'll take a gander at it anyways as well as the intake manifold, They seem identical to me. a closer inspection maybe.. thanks for the help guys!

kirk

you should see a flat spot on the block right where the transmission would bolt up at. look to the right of the engine, just below the valve cover.

 

[Kirkosaki]

Yeah i got the motor out there now, i needed to replace the power steering pump. Found it. It's a CA16. thanks!

 

[greenbean699]

sorry to hear its only a ca16de.........strong but not a ca18de

 

[Red_Coupe]

good to see u found out what your looking for.