Nissan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Ok...so I just swapped a ca18de into my 88 pulsar...I swapped the entire chassis wiring harness over from the donor car..but here is the thing...I have no idle now..and I dont know why?...any help would be great..
 

·
Registered
Joined
·
734 Posts
the ca18de has a idle switch built in with the TPS but have you pulled the engine codes to see if anything else could be bad?
 

·
Registered
Joined
·
734 Posts
yeah you could have a couple things wrong, best to check ECU first

did you move the TPS any? if so, did you set it back with a multi-meter?
 

·
Registered
Joined
·
734 Posts
well on the ca18de. you will need to locate the #19 terminal on ECU plug that has 20 pins.
with the plug facing you, its the 4th one in, starting on the right of the plug, top row.

if i remember right, its 5.0v at full throttle. my memory is bad. i may be wrong.
 
1 - 6 of 6 Posts
Top