Brake
Join the discussion
Recommended Reading
-
oil pan gasket
B13 91-94 chassisI think its time to change the gasket again, I took it somewhere last time but I think I will do it myself this time. Do you need to remove the header pipe and support bar to get the pan out? it looks like it.I'm losing oil around it even after tightening the oil pan nuts.- 2
- 304
-
tom434 · updated
-
LED headlights
B13 91-94 chassisAre they really worth the time on something as old as my 92 Sentra E? My 63-year-old eyes do not see very well at night anymore and I thought an LED upgrade would help. It certainly helped inside with an LED dome light.- 2
- 151
-
tom434 · updated
-
I need help
B13 91-94 chassisSo I did a egr delete on my sentra and it runs fine then I got a cold air intake and it run with the maf sensor plugged in but if u rev it up and when the rpm come down it does and when its at operation temp it won't stay runing unless you unplug the maf sensor I checked for air leak and vacuum...- 2
- 344
-
SinisterSentra · updated
-
blower resistor question
B13 91-94 chassisI found out in a previous thread that the blower resistor might be the reason my fan only works on setting 4. The question now is should the blower still work if the plug that attaches to the resistor is disconnected? Are there any visible signs that the resistor is toast? I'd hate to buy a...- 52
- 82K
-
How do i change a distributor?
B13 91-94 chassishey guys, quick question how do I change the distributor on a 93 sentra ga16de my had a ton of oil in the cap do I take the old one out and just slide the new one in or is there a special process I have to go through to line up the timing or anything like that thanks in advance- 1
- 326
-
infinityb3ast · updated
Join now to ask and comment!