Nissan Forum banner
21 - 27 of 27 Posts
Nope. You didn't read it correctly. It went up to 700 mmHg. Which is 13.5 psi.
 
AZ-ZBum said:
Nope. You didn't read it correctly. It went up to 700 mmHg. Which is 13.5 psi.


Well I don't have my gauges anymore but I could've swore it was 7PSI... My bad.
 
Discussion starter · #23 · (Edited)
so to install the boost gauge I just open up the center (under the gauges ) , take off the old gauge and replace it with the new gauge? can I use the existing wires and conections or do I have to modify something? sorry guys for all the questions but im a 17 year old kid who loves his Z and finally got enough money to do some stuff.
by the way I think someone should sticky this, these are musts have mods for the turbo Z's.
 
you'll have to run a hose from the plenum to the gauge itself depending on what kind of gauge you get. The gauges typically come with instructions.
 
hondakillerZX said:
so to install the boost gauge I just open up the center (under the gauges ) , take off the old gauge and replace it with the new gauge? can I use the existing wires and conections or do I have to modify something? sorry guys for all the questions but im a 17 year old kid who loves his Z and finally got enough money to do some stuff.
by the way I think someone should sticky this, these are musts have mods for the turbo Z's.
Boost guage installation is fairly rudimentary at best. If you wished to install it in the old stock guage location, such as me and Todd and a few others have done, and did a write up, then it might be worthy of a sticky....... ;) I installed my boost guage in the stock location, retaining most of the old housing as well, but with a few changes. You may wish to check under my name in the gallery to see what was done. :)
 
B@lliZtiK said:
Boost guage installation is fairly rudimentary at best. If you wished to install it in the old stock guage location, such as me and Todd and a few others have done, and did a write up, then it might be worthy of a sticky....... ;) I installed my boost guage in the stock location, retaining most of the old housing as well, but with a few changes. You may wish to check under my name in the gallery to see what was done. :)
maybe like.....here?
 
21 - 27 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top