Nissan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
272 Posts
Discussion Starter #1
When I took my KA harness out.. there were two wires one blue and one white that I had to cut...The wires run into the Hole in the firewall and then over the the drivers side...does anyone know what these two wires are? I HAD to cut them in order to get my KA ECU Harness out. Are they needed since I got my SR harness back.. To help the wires run into a small(1cm) size wire tubing that runs to the drivers side under the dash.

C:\Documents and Settings\Administrator\My Documents\My Pictures\2004-12-09-2134-25
 

·
Registered
Joined
·
272 Posts
Discussion Starter #2
sry dont know how to put pics on the forum...ill put some on once i find out...it might be cruise control(but i dont know) it never worked anyway
 

·
Nismophiliac
Joined
·
1,517 Posts
use the website www.imagestation.com

Thats the easiest way to put images on this website.

The only advice I can give you about the wiring bit is, trial and error. Mods to the wiring do not include a blue/white wire i don't think. go ahead a connect everything as normal and go from there, nothing wrong, don't worry about it.
 
1 - 3 of 3 Posts
Top