Nissan Forum banner
1 - 3 of 3 Posts

·
sunny/ca18det swap soon
Joined
·
359 Posts
Discussion Starter · #1 ·
was sup people damm i havent been on here for a while well i sold my ca18det swap and im kinda ok on life right now so with that said here it goes. im starting a new project 88 sentra with ca18de with a ca16de tranny for street use fun dailly driver. so what i want to know i will be using the ca16de tranny flywheel clutch and axles. what about my shift linkage can i use the e16i? or do i need the ca16de shift linkage? heres the list of what i need
ca18de
ca18de ecu and wire harness modified body harness for the ca18de which i already have with the custom cluster from boost boy
ca18de afm
ca16de tranny,flywheel,axles clutch what else will i need?
 

·
Nissan No More
Joined
·
1,904 Posts
Not sure about the clutch linkage but something tells me you'd be better off with the CA cable.

Let's see, what else will you need.
- Motor mounts & cross member for the CA
- Larger radiator, CA18DE Pulsar Radiator w/fans would be best
- Pulsar p/s resevior and p/s lines
- There's a group of vacuum switches attached to the pulsar airbox, you'll need those if you don't have them. Make sure you have all the power valve stuff
- Upgraded fuel pump, Pulsar pump should work
- Bigger front brakes....see my AD18 sticky :D

That's what comes to mind right now.
 

·
sunny/ca18det swap soon
Joined
·
359 Posts
Discussion Starter · #3 ·
hey alan i want talked to you in a while but the only thing i have right now is the custom body harness and boost boy old hybird cluster i know i need to get the other parts im going be making my own solid motor mounts so that i wont have any promblems at all with that. i guess im going trough all this all over once again but my problem is i dont know what shift linkage to use. i think i have to use the ca16de shift linkage becuase the fact that im going to be runing the ca16de tranny. i remember when i first started the ca18det swap i needed the ca18de shift linkage becuase i was using the ca18de tranny
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top