Nissan Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
196 Posts
Discussion Starter #1 (Edited)
Just want to get a second opinion on this. I've been reading on various boards about lowering springs for the '87-'90('91 overseas) Pulsar NX/EXA. It seems as if lowering springs are non-existant in manufacturers catalogs but the struts interchange between the two. In other threads I have read on Nicoforums and Nissanexa, the explanation is that the Sentra struts and springs are OK to use, but while the fronts will work, the rear springs may not lower the car much if any because the Pulsar is much lighter in the rear.

Sounds plausible, but what have you guys/gals done with your Pulsars? I wanted to get a set of Tokico's and springs of my choice like I had on my '90 Sentra, but before I pay cash for something that may or may not work I want to check it out first. I just don't want to end up with the front dropped where it should be and the ass-end at stock height.
 
1 - 1 of 1 Posts
Top