ATTN: Katana 200sx
Join the discussion
Recommended Reading
-
Shift lock stuck
B14 95-99 chassisHi, 96 Sentra here. Just replaced faulty brake light switch. All works good. But now shift lever will not move. When I press on the brake no "click" for the shift solnoid. It is coincidental that it fails at the same time? Are there any specific fuzes for this component that I've missed...- 4
- 5K
-
Rwd 200sx B14
B14 95-99 chassisSo I am not super knowledgeable with cars but am really wanting to learn and well I'm going to be getting a roller 200sx b14 1995, and I will say I'm a big 240sx fan and have been learning alot about them recently. I'm very curious to know if it is possible to fit a s13 or s14 subframe on a...- 3
- 63
-
TheOGGiz · updated
-
Water leak behind glove box (need help)
B14 95-99 chassisCheers, Need some help here! After a rainy day i found drops of water falling from behind glove box, in order to find the leak i took the garden hose and turn on the water for 15 minutes (and i gave the car a heavy bath) ... nothing happen, but when I started the car and drive for a while ...- 13
- 11K
-
intake air sensor
B14 95-99 chassisim trying to install an aftermarket part to my 96 Nissan altima. and i bought a shot ram intake. there isnt a place to put the air sensor. any adive on what i should do? thanks.- 2
- 275
-
Second gen VQ swap in 200sx
B14 95-99 chassisI am jumping into this VQ35HR 200sx swap pretty quickly just a couple things I am stumped on and looking for some opinions on motor mounts (I know I’m going to have to fabricate things) which tranny is best to use , which axles to run and any suggestions on wiring harness and ecu- 1
- 366
Join now to ask and comment!