Joined
·
16 Posts
It seems impossible to find any tail lights for my 96 200sx se. Can anyone help?
Are there any 200sx Aftermarket Tail Lights???
1 - 20 of 20 Posts
Joined
·
4,744 Posts
it is impossible, there are none. A search would have told you this, it has been beaten to death. However if you MUST have a differnt set of taillights, you could always fab something up and make it work. I've seen a 200sx with skyline tails, so the sky is the limit.Partyboy25 said:
As I've said before, we need to sticky this!
Joined
·
2,294 Posts
damn, and i thought it would be at least a week before someone would ask that question. Oh well, gotta start the count over.
hell they can make a stick with nothing in it just a title "no one makes 200sx tail lights"
the only thing you can do is this
![]()
the only thing you can do is this
you can buy the sheets in diffent sizes then simply cut them to size........either do that or leave it stock.Jaralaccs said:
click here they have 4"x8" up to 12"x 24" you can also choose between 20% tint and 35%
Joined
·
432 Posts
Cept cops LOVE to pull people over for that. My friend got pulled over so much in his old VW when it had smoked lights.
hey i never said there wouldnt be consiquences lol.....but if you get a wild hair up your ass to "get custom tails" that is the oly thing you can do. also if you get pulled over they will simply pull off....hell you could do it with the po-po standing there. remember that stuff that was big for awile? (i still se it now and then) it was that tint you put on the inside of the window and it was rubberish and just stick there? (no sticky side though) well i suspect that is what this stuff is.
Joined
·
4,276 Posts
- Start by removing the light bulb from the housing.
- Preheat the oven to 325 deg.
- When the oven is ready, place the headlight housing onto a baking sheet and put it in the oven for approx. 2 min (you might need to repeat this step until the silicon is pliable enough to work with)
- Remove the housing from the oven (with the pan it's on)
- Place the housing on the counter or whatever surface you choose (we used a towel) and put the baking sheet in another spot as you will be using it again
- Use the blunt side of the knife to pry the outer plastic piece away from the housing. You will need to use the heat gun/blow-dryer at this point to help you get it apart. Also, be aware of the little clips and be sure to unclip them without breaking or melting them
Joined
·
7,994 Posts
- preheat oven to 800 deg
- insert tails
- leave tails in for 5 hours
- bam, custom 'melt look' tails
everyone's doing it
(im kidding)
Joined
·
1,812 Posts
^^ haha, somebody will probobly try it too 
Joined
·
1,812 Posts
yeah i know right, ive seen this topic over and over and over again. It seems that nobody wants to search
Joined
·
81 Posts
they have the spray tint u can make it as lite or dark as u want
Joined
·
1,812 Posts
just got another set to the tails from ebay and tint those with Night shades. That way if you mess up, you can always go back and put the original ones back in.
Joined
·
16 Posts
Ok, if they can get these other companies to make new stuff for the ga16 then why cant they get someone to make aftermarket tail lights for a 200sx??? It cant be as hard as making (i.e.) aftermarket cams :waving: ...is it just doesnt make any sense to me am i the only one that feels that way???
am i the only one that feels that way???no your not but its just hard to come up with around 100 people that want the same style tailsPartyboy25 said:Ok, if they can get these other companies to make new stuff for the ga16 then why cant they get someone to make aftermarket tail lights for a 200sx??? It cant be as hard as making (i.e.) aftermarket cams :waving: ...is it just doesnt make any sense to me
1 - 20 of 20 Posts
