Anyone ever use a Supra TT fuel pump?

1 - 1 of 1 Posts

ktrends

Guest

Joined Jan 1, 1970

0 Posts

Discussion Starter • #1 • May 16, 2002

I have a supra TT fuel pump, from doing my fuel upgrade on my supra. I have heard this is a pump a lot of DSM/WRx owners run. anyone ever try one in a sentra?

Thanks
James
92 SE-R DET

1 - 1 of 1 Posts

Recommended Reading

B13 and N14 Factory Service Manual Volume 1 & 2.

B13 91-94 chassis

Hello, these are the links to download the Nissan B13 and N14 Chassis Factory Service Manual, they are two volumes of about 1200+ pages zipped in two files, total file size is about 220MB. Nissan B13 and N14 Service Vol 1 - 100NX NX1600 NX2000 Sunny Sentra GA16DE SR20DE SR20DET.zip Nissan B13...
- 202
- 249K
- S
  SergioCR · updated 22 d ago
Struts

B13 91-94 chassis

My struts are getting a little weak in the on my 92 Sentra E. I bought the struts Monroe I'm being told by some to replace the whole assembly. So I looked high and low and found other than lowering and racing packages no complete assembly, just struts what am I missing?
- 1
- 339
- tom434 · updated 1 mo ago
1994 Sentra 1.6L missing 2nd 4th and reverse gears.

B13 91-94 chassis

I did the clutch on my 1994 Nissan Sentra 1.6L and torqued everything to spec, clutch is amazing but I’m missing 2nd 4th and reverse gears. But I Figured out when I jack up the transmission I gain my gears back, I put all the mounts back and everything seems to be fine, does anyone have a fix...
- 1
- 398
- M
  Matthew.brz · updated 1 mo ago
Sr20 transmission fitting?

B13 91-94 chassis

I’m trying to figure out where this fitting on the Sr20 transmission goes. It had a hose connected to the fitting on the transmission but I have no idea where the other end connects.
- 4
- 405
- 34Diesel34 · updated 1 mo ago
Sr20de engine swap

B13 91-94 chassis

"]Hi there Im all new to the Sr sene just wanting some info I have a primera p11 sr20de and looking at doing a engine swap to sr20ve can anyone tell me what all it will need. Have complete motor loom and ecu. Will it plug up to the standard loom for sr20de loom or will I need to change some...
- 0
- 237
- M
  makezmslovo38 · updated 2 mo ago