Nissan Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter · #1 ·
E15et stock numbers 94whp 105wtq

Project goals are 240whp 220 wtq

in an N13

the chassis has been under going slight modifications

the front rotors are power slots with the Nx2000 brake upgrade

the rears are also the rear discs off of a Nx2000

the suspension is eibach ERS springs raped around tokicos

and full weight with me in the car an about 1/2 filled tank is 2018lbs

hoping in the end to see well into 12s... but we will see
 

·
Registered
Joined
·
1,124 Posts
lol cus i know when someones a jerk and im a jerk back to them i get points taken.. and they dont. anyway im curious to see if this e15 will hit his 12 sec mark and... anyone ever just turbo a e16i or is that just a terrible idea and i should shut up?
 

·
Moved on...Ciao!
Joined
·
629 Posts
Judging from a few recent posts, it may seem possible, but I wouldn't know how reliable it'd be...or how low you'd have to set the wastegate.
 

·
Registered
Joined
·
1,124 Posts
cus i wanna practice welding so i figure pick up a 88 junker and weld me up a manifold for kicks and run some oil lines and some other stuff throw my t25 on there see if i can get it to run lol idk im just throwin ideas around im bored cus i got laid off
 

·
Ex-mod/nissan guru
Joined
·
2,136 Posts
rep point : i give them and take them for 2 reasons: very good technical posting/helping/advise and jerking around like : post whoring, insults, non-pertinent posts.... if you go throu you cp, you can see the comments i put to wath i take/add to your rep points... something you should also remember is that when it gets to 0... your out!!... but dont worry, it takes a lot of time but it reflect the credibility everyone got around here...


Anyway : please get back to subject.
 

·
Ex-mod/nissan guru
Joined
·
2,136 Posts
How did you got the rear disks on there ?? you got some pictures ??

BTw to get 12sec out of that engine prepare the $$ cuz it wont be cheap... the only ones that i know of being in the 12 are some aussies with 10k$ and more invested in they're engine ...

Is the engine already in the car ??
 

·
Registered
Joined
·
2,376 Posts
Crazy-Mart said:
rep point : i give them and take them for 2 reasons: very good technical posting/helping/advise and jerking around like : post whoring, insults, non-pertinent posts.... if you go throu you cp, you can see the comments i put to wath i take/add to your rep points... something you should also remember is that when it gets to 0... your out!!... but dont worry, it takes a lot of time but it reflect the credibility everyone got around here...
damn rep points...someone took a point away cause they were spreading bs about tires and stopping with the wheels locked up. ass.
 

·
Registered
Joined
·
51 Posts
Discussion Starter · #16 ·
I will have some pics in a while.. not quite sure when... but yea... basically they more or less bolt in... mostly...
 

·
Registered
Joined
·
51 Posts
Discussion Starter · #17 ·
Crazy-Mart said:
How did you got the rear disks on there ?? you got some pictures ??

BTw to get 12sec out of that engine prepare the $$ cuz it wont be cheap... the only ones that i know of being in the 12 are some aussies with 10k$ and more invested in they're engine ...

Is the engine already in the car ??
I know a guy with a n12 EXA in aus running 13.2 with a complete interior and everything else ON STREET TIRES!!

so far he has only spent $3000aus... so.. yea.. and the guys with 10k in the motor are sitting in low 11s right now with fully streetable cars....
 
1 - 17 of 17 Posts
Top