Nissan Forum banner
1 - 17 of 17 Posts

·
Paging Mr. Herman
Joined
·
1,042 Posts
I'm pretty sure you are out of luck unless you want a custom job. I do believe that a couple of companies used to make tails for the 200SX. Unfortunately, I don't know any of their names off hand. You may be able to find a used pair. Good luck hunting.
 

·
Registered
Joined
·
124 Posts
Im gonna say this and nobodys going to belive me and you will highlite my post and say yep your right we don't but I swear to god about a year ago on ebay there was altezzas for a 200sx. I seen them and thought they would fit my car but there were four piecees. no bs. somebody makes them
 

·
Oh, Herro!
Joined
·
2,337 Posts
clayk16 said:
Im gonna say this and nobodys going to belive me and you will highlite my post and say yep your right we don't but I swear to god about a year ago on ebay there was altezzas for a 200sx. I seen them and thought they would fit my car but there were four piecees. no bs. somebody makes them
I remember this. There was a gigantic week-long explosion over on B15Sentra and a bunch of people got mad, and some other people acted like idiots, and we finally figured out that, in fact, the tails are for the Lucino, or some other very similar Asian-market car. They looked very similar to the 200SX tails, but they were not the same.
 

·
Paging Mr. Herman
Joined
·
1,042 Posts
how much would custom tails cost roughly?
It really depends on how much you want to spend. If you are just looking to do a custom install w/ Sentra tails it probably won't be huge. However; if you are looking at having tails from a Skyline, you are looking at a major amount of $$. Find a respectable shop in your area and ask them for an estimate.
 

·
Registered
Joined
·
1,392 Posts
samo said:
I remember this. There was a gigantic week-long explosion over on B15Sentra and a bunch of people got mad, and some other people acted like idiots, and we finally figured out that, in fact, the tails are for the Lucino, or some other very similar Asian-market car. They looked very similar to the 200SX tails, but they were not the same.
You calling me an idiot....or the other idiots? :D I loved that thread...by the way, it was for the Sylphy. ;)

On the whole tail light issue...I know I have seen clear tails for the 200 before....someone on sr20deforum.com has (or had) them.
 
G

·
Yeah there was a white 200sx on that had clear tails, not altezzas, i emailed someone about them a while back and they told me that they were tails from a honda civic that had been installed, but i am not completly positive.
 

·
Oh, Herro!
Joined
·
2,337 Posts
andre said:
On the whole tail light issue...I know I have seen clear tails for the 200 before....someone on sr20deforum.com has (or had) them.
They were custom-made, I'll bet - one of the back issues of NPM/SOLM has an article about them.
 

·
Paging Mr. Herman
Joined
·
1,042 Posts
so do you know if those tails that you see at say autozone for the civics that look kinda like altezzas but aren't fit the 200? if so, that would be great since those are only about $50.
They won't fit unless you do a custom job. Also, avoid $50 cheap APC tails at Autozone. They are cheaply made and quickly become a nice little rain collector. Remember, you get what you pay for. :D
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top