[se7enty7]

I really don't want to have to pay $110 to have my alarm system installed.

Anyone know the wiring schematic or a good walk-through??


I have a clifford matrix 1, it has keyless entry and alarm.


Thanks!

(I searched the forums and found nothing..)

 

[Project GTi-R]

i installed my own alarm in my 97 200sx so if you have any specific questions feel free to email me at [email protected]

 

[ccroaddog]

I really don't want to have to pay $110 to have my alarm system installed.

Anyone know the wiring schematic or a good walk-through??


I have a clifford matrix 1, it has keyless entry and alarm.


Thanks!

(I searched the forums and found nothing..)

i can get an auctual wiring diagram for your car but to ensure proper install test the wires first. for future reference i can get wiring diagrams for ANY car.....

 

[Project GTi-R]

hey can you get me a wiring diagram for a gti-r engine (sr20det)?

 

[ccroaddog]

i dont know if i can find a wiring diagram for that engine harness but if you ever want to install an alarm on your own i can get you a tech sheet.

 

[sentra95GXE]

can you get me a tech sheet to install an alarm on a 95 sentra gxe?

 

[se7enty7]

ccroaddog,
I was wondering what I could do to get a tech sheet.


My email is [email protected]



Thanks,
Jacob

 

[ccroaddog]

can you get me a tech sheet to install an alarm on a 95 sentra gxe?

yup give me till tommorrow and i'll have it

 

[se7enty7]

Ack,

I am really sorry for being an idiot...


I have a 98 200sx se


Thanks, and sorry again : /

 

[ccroaddog]

ccroaddog,
I was wondering what I could do to get a tech sheet.


My email is [email protected]



Thanks,
Jacob

i got the tech sheet give me time to crop off where i got it

 

[ccroaddog]

Ack,

I am really sorry for being an idiot...


I have a 98 200sx se


Thanks, and sorry again : /

i just got your tech sheet give me time to crop off where i got it

 

[ccroaddog]

Ack,

I am really sorry for being an idiot...


I have a 98 200sx se


Thanks, and sorry again : /

sorry it took so long but my scanner wasnt working e mail you web address and i'll send u the tech sheet

 

[se7enty7]

thanks

Thanks for your help,
my email is [email protected]t


Thanks!

 

[se7enty7]

Just making sure ccroadag (sp?) is still around... haven't heard from anyone in awhile..

[email protected]


98 200sx se

Thanks!
Jacob

 

[se7enty7]

bump

still looking for wiring diagram/well written instructions for a 98 200sx alarm install

 

[se7enty7]

uum, bump for the last time before I give up and spend next weeks food money on getting an alarm installed that I could install myself if I had wiring diagrams..

 

[omega]

i'll go into work and pull up the diagram from techsoft tommorow, TechSoft is software put out by DEI the company that owns Viper, Clifford, Avital, Python, Sidewinder, Hornet, etc... it gives you pretty much every wire color and location you need in hooking up an alarm, I'll try to post it as soon as possible.

josh the best buy ho

 

[se7enty7]

Man I would appreciate that soooo much you have no idea




And by the way, it is a clifford matrix 1

Thanks a million and a half man

Jacob

[email protected]

 

[omega]

1998 Nissan 200SX

Item Wire Color Wire Location Pol
12V white/red ignition harness +
Starter black/yellow ignition harness +
2nd Starter black/blue ignition harness +
Ignition black/white ignition harness +
Accessory blue&blk/pink ignition harness +
Powerlock gray white harness in -
Unlock purple/silverdots driv. kick panel -
Parking L. red/blue conn. above fuse +
Headlight grn/org, pnk/blue st. colummn sep. L,R +
Door Trig. red/white driv. kick panel -
Trunk Pin red/silv. dots light in trunk -
Tachometer green coil, instru. panel n/a
Brake Wire red/green brake pedel switch +
Horn Trig. green/yellow steering column -
LF Win UP/DN green - blue driv. door A
RF Win UP/DN red/wht - red/blk white harness in A
driv. kick panel

This was different in the post, i used it to install the matrix RS2 in my 96, i had to bypass the clutch but hey what the hell

 

[se7enty7]

What do you mean by "this was different in the post"?


I'm awfully confused about the location of the wiring?

Where is the ignition harness?



I appreciate your help, but I'm starting to wonder if I shouldn't just fork out the cash to have it done by a shop (as much as I can't afford it, heh)