Nissan Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter #1
Hi guys,

Have a current problem on my B13 GA16DE.

Seems that the blower doesn't come on for the first setting. From the second to the max it's working fine.

Has anyone had a problem like that ?
I would like to DIY to save costs as the mechanic would rather replace the whole consol than to change a switch..rip-off !
To think I just had the whole aircon (compressor, belt, coil) replaced.

Can anyone also provide instructions to gain access and check the component/switch/realy etc?

Would much appreciate this.

Ace.
 

·
Registered
Joined
·
61 Posts
Discussion Starter #3
Can the resistor be the cause?

as my aircon selector does not work in the first setting only.

Settings 2 to 4 are ok.

Nonetheless I'll check it.

thanx
 

·
Registered
Joined
·
61 Posts
Discussion Starter #5
switch feels ok.
tried banging the consol as well as the areas around the blower (not recommended procedure, but sometimes it works).

Guess it's a real problem. Guess I'm at the mercy of the mechanic.:(

When the engine is running, turning on the aircon selector to 1st position, you can hear the compressor cutting in and the RPM dips a little. But the blower doesn't come on.
 
1 - 5 of 5 Posts
Top