Nissan Forum banner
1 - 1 of 1 Posts

·
Registered
2018 Nissan Pathfinder SL
Joined
·
4,298 Posts
check to see if the compressor clutch is engaged and turning the compressor.
The center of the compressor pulley should be locked to the outer.
Are you looking at the dual pressure switch ?
This connects the power to the ECM so no 12v at terminal two is bad. blue/yellow
HA-36 in the FSM, download one for free if you don't have it from phatg20.net
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top