Nissan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have just recently changed my engine in car. Ran perfectly when I drove it home. Did not attempt to start car for 2days because of oil pan leak. After fixing pan gasket, will not start. gas is pumping, changed sparkplugs. Not hearing the injectors open like in old engin. Car roling over good but will not start. Please! Help me.
 

·
Registered
Joined
·
24 Posts
do u hear your fuel pup surging on? check /change your fuel filter. check all of your fuses and make sure everything is connected
 

·
Registered
Joined
·
9 Posts
Crank angle sensor major player

jango said:
I have just recently changed my engine in car. Ran perfectly when I drove it home. Did not attempt to start car for 2days because of oil pan leak. After fixing pan gasket, will not start. gas is pumping, changed sparkplugs. Not hearing the injectors open like in old engin. Car roling over good but will not start. Please! Help me.
Your crank angle sensor sends the signal to the injectors. Anything inhibiting this such as corrosion or contaminants will cause the car not to start.
 
1 - 3 of 3 Posts
Top