Nissan Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 · (Edited)
hello from joliet,il.i'm a new guy of coures. i have a 96se that i'm rebuilding and could use any info. i'm starting with engine,a/t trans,and front suspention(bushings) ect. any and all help would be great.loking to jion any clubs in the chicago area
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 ·
96 se rebuild

KA24Tech said:
What do you need to know? Are you going for performance or just want to have it basically stock? I have taken my 93 about as far as it can be away from stock but I can give you assistance for the parts to give you the desired level you want.

Troy
thanks for the reply, hoping to take it as far as it can go.
rebuilding eng. so far.........

hot shot cai
jwt cams,ecu
hot shot header
unorthodox pulley
energy susp. 95-99 maxima frnt susp. bushings
a arm brace
strut bar
level 10 a/t torque convert. & valv. body

would like to know more about upgrading.........
ignition system
fuel injection
struts and springs
big breaks
poly motor mounts
any thing else that makes this car go, stop & turn

thanks again
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #6 · (Edited)
thanks great info, i got an new engine w/ 37,000 on it so as far as valve springs ,lifters,pistons and rods i'm gonig to wait or may rebuild the old engine. i e -mailed white line a few times but heard nothing back so i went w/the 95-99 maxima set. i talk to stillen and they said the fsb on altimas are pretty good. i have rear disc already so i'll go with brake lines for know. if i call mds will they know what box and coil i'll need? got hawk pads on now w/race stopper cross drilled and sloted rotos.i've read that poly mounts can really feel the eng. vib. ,have you hear of c.p.p japan in fla.,good price on replacement mounts but the price seems a little low for quality. last who, what where and how on the fuel reg.

thanks again
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top