Nissan Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 93 sentra XE with no tach and want to change the gage cluster with a tach. I have the cluster with the tach but the wiring set up is different. has anyone swaped this out before. was it hard and how much rewiring was done.
 

·
Your electrical friend
Joined
·
2,177 Posts
eads101 said:
I have a 93 sentra XE with no tach and want to change the gage cluster with a tach. I have the cluster with the tach but the wiring set up is different. has anyone swaped this out before. was it hard and how much rewiring was done.
I wrote this up just for people like you. :) If you have any questions feel free to pm or e-mail me. I can also tell you where to find the tach wire if you don't want to tap into the wire right at the ECU.

http://www.nissanperformancemag.com/february03/b13cluster/
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Swap completed, need info on tach wire

I completed the swap with great success, but I would like to know where the tach wire is hidden. I was going to tap to it from the ECU. The info would be helpfull. Thank you.


toolapcfan said:
I wrote this up just for people like you. :) If you have any questions feel free to pm or e-mail me. I can also tell you where to find the tach wire if you don't want to tap into the wire right at the ECU.

http://www.nissanperformancemag.com/february03/b13cluster/
 

·
Your electrical friend
Joined
·
2,177 Posts
It's in this harness:

 
1 - 4 of 4 Posts
Top