Nissan Forum banner

93" D21 electrical problems, please help!!!

23K views 10 replies 7 participants last post by  Paulpep 
While you checking things, make sure all the connectors, and grounds are clean. Any place wires are together, relays, bodys ground, etc. I used an elctrical contact cleaner on all the connections. Just be careful with the connections. Don't force them apart, and don't pull on the wires.
I am in the midwest like you, and with the temperature changes, and the humidity, they can get dirty. Plus, if you bought this from a lot, it might not have been ran steady for a while, letting the connections to start oxidizing.
Good Luck with your new truck!!!
 
Make Sure the belt is good (not cracked, or glazed on the sides), clean, and tight. Make sure the pulley is clean too. I usually wipe down the pulleys, when new, or when changing a belt. I use brake clean, sprayed on a rag, not directly on the pulley. A glazed belt, will slip on a new pulley. Change the belt, if it is old. Winter is coming.
Good Luck
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top