Nissan Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
ok so i wanted to rig up a short ram on my 93 so i left the stock tubing on and everything i just bought a maf adaptor and threw a filter on it but theres a tube that is coming from transmission im guessing kinda looks like a sensor on it and u can clearly see it it comes up to be joined with a tie with another tube but this one from transmission curves at top and points down like a cain does this go on the maf adaptor hole or where does it go? and i have that and took off a/c belt to try to improve performance is there anything else i can do without spending more than 20$ or do with wat i have thanks
 

·
Registered
Joined
·
4 Posts
I have a 93SE and I just recently did the same thing. I have no hose coming out to be connected. It probably got disconnected from the stock tubing coming out from your engine. Just make sure you have a clamp on that filter connecting to the MAF or it will boggle.
 
1 - 2 of 2 Posts
Top