Nissan Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Stuck Rotor

bahb said:
I am trying to replace the rotors on my father-in-laws 84 stanza. I can not figure out how the rotor and hub separate. I pulled the four torx bolts off the back, have movement, but can not get the hub and rotor to come apart. What is the problem
Thanks for your help.
My first time. Hello to all.
It is most likely stuck. Rust builds up around the inner flange and binds the rotor to the hub. wet the hub with breakfree or liquid wrench and let it set for a few minutes then smack it (the rotor) with a a rubber mallet. this should bring it off. just remember when you put the new one on to scuff all the corrosion off of the hub and clean any lube residue off of the parts.
Fozzwhatz
;o)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top