Engine mounts are a definite possibility, so are inner CV joints. If it's AWD, driveshaft U-joints. If it's more of a click than a clunk, could be loose axle nuts (there's a bulletin about those). You say "after you start", if that means it clunks before you put it in gear, engine mounts are the most likely culprit.
2020 Rogue S - CLUNKS
After I start my Rogue, I hear a "clunk". Back up and 2 more "clunks". Not not all the time. Engine mount, transmission, brakes ??? TIA
1 - 5 of 5 Posts
Update. I was wrong before. Doesn't "clunk" until you start moving. Today it "clunked" when I came to a stop, at a stop sign. Not 4 wheel drive. Basic "S" version. But it doesn't "clunk" every time. TAIEngine mounts are a definite possibility, so are inner CV joints. If it's AWD, driveshaft U-joints. If it's more of a click than a clunk, could be loose axle nuts (there's a bulletin about those). You say "after you start", if that means it clunks before you put it in gear, engine mounts are the most likely culprit.
First thing I'd check is the CV's, that sounds like maybe a bad inner.
Took it to the shop - routine oil/tires, under warranty. They said they couldn't find anyting. I had them document it. If it still does it, I will raise a stink next oil change. Thanks for all the help and suggestions.
1 - 5 of 5 Posts
Nissan Forum
Nissan Forums is the go to place to talk about your favorite Nissan model, including the Rogue, Maxima, Altima and even sports cars like the 370Z and 200SX.
Full Forum Listing
Recommended Communities
