On this note... how hard is it to candy 200sx tailights will it look ok over the amber light and would it pass inspection?
do you have a pic of this mod? I was going to do this too!Manytoys said:Hey.......for the candy apple red turn signals.......just mask everything really good and spray.....i sprayed all the red too so it is uniform....b/c it is a lil off of the factory red......not quite as transparent as the factory lens. I used testors brand "candy apple red clearcoat" and then used their clear clearcoat over top....to get a lil more shine. As for inspection.....in PA.....in table IV of the inspection manual...required motor vehicle lighting equipment....it reads "turn signals.........2 red or amber.......so my interpretation is that the candy apple mod is totally legal!!!!
Good Luck,
Chris
I actually used some red tail spray from Japan, I got it at a NOPI show, but the Testors will give you the same look!! Just don't spray too close, and do about 3 coats. After you do it, you will notice so many other cars with factory all reds you won't even sweat itBlu200SE said:What up Blu200SX. Yeah that blue color is phat. I had a choice between that or jalepeno green i think they called it.
JT200SX-N-FX, nice car thanks for the picture, i think its a pretty good mod since there arent any clears for us. And if it passes inspection then i might go for it, did you use the testors brand also?
thanks
Tru Tru!!Mazoku said:ScorchN200SX, your link is bad.
JT200SX-N-FX, thanks for the offer, but I'm going to wait until it warms up. In this weather I think the paint would freeze before it hit the tails.I will be looking for some in about May tho.