Nissan Forum banner

2004 Quest ABS issue

1540 Views 6 Replies 3 Participants Last post by  Gambellman
Hey there. New to the group, hope I'm in the right place. Having issues with the brakes. Feels like the ABS is coming on under dry conditions and regular braking. Is this a wheel speed sensor issue? Also is there an ABS fuse. It looks like the fuses for the ABS is almost linked to something else like an "L" shaped fuse. Hoping I can just go without ABS. Getting rid of this van in a few months. Don't want to do expensive repairs. Thanks
1 - 7 of 7 Posts
Does the ABS warning light stay on all the time? If it does, then there are fault codes that can be read which would point to the actual problem. If you want to perform any diagnosis, then you can download a copy of the FSM for your vehicle from Owner's Manuals.

There are several fuse/fuusible links for the ABS system. The "L" shaped device is a fusible link.
That's the weird thing. I have no lights on the dash. Just the actual pulsating of the brake pedal. Rotors and pads are brand new. Thought that might be the problem so switched them out.
I just shared a picture of the fuse panel. See the 3 40 amp fuses on the top left? That's what I need for the bottom right. Tried a single 40 for the ignition but doesn't fit. Anyone know where I can get one? Is this a dealer only item? Thanks.
It's Nissan P/N 24370-C9921, which runs about $20. Rockauto shows it in the aftermarket as Littelfuse # JCAS40 for $1.97+shipping:


Advance Auto Parts has a Littelfuse fuse and fusible link kit for $20:

Advance Auto Parts - Down for Maintenance

Or, the individual 40A fusible link for $4.99:

See less See more
Thanks everyone. I went to my local Nissan dealer and got the part I needed. $25. Not bad. Running again. Disconnected my wheel speed sensor. No ABS but problem solved.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top