Nissan Forum banner
1 - 1 of 1 Posts

· Registered
8 Posts
Discussion Starter · #1 ·
Hi ,
I replaced the throttle actuator do to failure, and can't get the car to go into diagnostic mode to relearn closed and open values. I've tried at least a dozen times, car warmed up, stopwatch to keep accurate times, instructions on my lap. The cel light never starts blinking. Is there some other thing I need to do before I do the 5 times throttle etc. procedure to get it into diagnostic mode? It sets the code for "unexpected idle" something or other. It's idling a little high, around 900 or so.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.