[MattGSO]

I'm pretty sure the wheel bearings or perhaps the whole assembly needs replacing. Front drivers side.

Has anyone done this? Is it a big job? Auto Shop quoted about $350.

I need to read up in my manual but I was hoping someone might have done it and can report back if it's worth tackling.

Thanks,

Matt

 

[metro273]

If you have a hydraulic press, then do it. If not, let the shop tackle it...

 

[MattGSO]

Thanks. I figured that might be the case.

 

[metro273]

You can save lots of $$$ if you disassemble the steering spindle from the suspension and then take it to a shop that can remove and install a new bearing for you too.