Nissan Forum banner
1 - 4 of 4 Posts

·
Biru O' Kudasai
Joined
·
1,426 Posts
Make sure the battery terminals are clean and tight. Try pulling the codes from the ECU to check for anything stored in memory. If nothing is stored whenever the Altima stalls do not turn off the key but try to check the codes in the ECU because they may just be temporary. The temporary codes disappear when the ignition is turned off.

Troy
 

·
Registered
Joined
·
33 Posts
does your rpm just keeps gonig down closer to 0 then dies? adujust your idle screw! just hope you dont adjust it soo much it pops out on the HWY i just use a sock and an l wrench to keep the screw hoe fill
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top