Nissan Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
I have a broken plug with 2 yellow wires. I got another plug with 3 wires-2 yellow and a green/black wire. But my harness only has 2 yellow wires coming into it.

I have a 5 speed manual. Do I need 3 wires? There is a green/black in the harness but it goes to the sensor along with a black and a white wire--total 3.

If you need to see a photo.......I can post one.
 

·
Sup Mod keeping the peace
Joined
·
7,222 Posts
There are two harness connectors to the TPS assembly:
- Two wire connector for the "throttle valve switch".
- Three wire connector for the "throttle sensor".

You probably got the wrong plug.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #3
TPS

I got the plug that faces the inside of the car and the pins face the front of the car.
 

·
Sup Mod keeping the peace
Joined
·
7,222 Posts
That particular plug is for the "throttle valve switch" which uses only two pins; the third pin is unused. Trace the two yellow wires to their respective pins and wire up the new plug respectively.
 

·
Registered
Joined
·
54 Posts
Discussion Starter #6
TVS

That particular plug is for the "throttle valve switch" which uses only two pins; the third pin is unused. Trace the two yellow wires to their respective pins and wire up the new plug respectively.
Thanks............
 
1 - 6 of 6 Posts
Top