Nissan Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter #1
Did a 12.0 @ 123mph on a stock SR20DE motor @ 22psi of boost at the Phoenix IDRC event on Oct. 12/13.

Only engine mods were JWT S3 cams.

My built motor that I took out before the race did a best of 11.9 @ 119mph last Oct. IDRC.

Look out for my new built motor and turbo setup for the March IDRC here in Phoenix.
 

·
Now a spec V guy
Joined
·
112 Posts
very nice, but dont tease us, what turbo? give me some more specs of the car. and congrads on another great run in the sr20

Brian
 

·
Registered
Joined
·
147 Posts
Discussion Starter #3
FMAX Manifold
Turbonetics T3/T04E (.57 / III / .82)
Greddy Type S Blow Off Valve
Tial 35mm Wastegate
Spearco Intercooler
JWT ECU - 72lb Injectors / Launch Control / Race Program
JWT S3 Cams
 
P

·
Guest
Joined
·
0 Posts
Congrats on that time
Are you using OEM pistons?
Wich compression?
I will be running a turbocharged Jdm SR20DE (not t).it has
10.0:1 compression. i plan to run high boost with stock pistons to see what can they withstand! Hoping 25 psi with a perfect setup and race fuel.

Keep working:)
 

·
Registered
Joined
·
147 Posts
Discussion Starter #5
I was using a stock 9.5:1 motor and running 21psi. This is with straight C16 fuel. I am not sure a 10:1 motor could hold up to 20+ psi. I personally would not try it, but best of luck. I hope you know how to swap motors.
 
P

·
Guest
Joined
·
0 Posts
OOPPSSS!
I WANTED TO SAY 15 INSTEAD OF 25.
YOURS HAD LOWER COMPRESSION. IN MY CASE 15 PSI WITH 10.0:1 IS THE MAXIMUM I WILL TRY

I DO SWAP ENGINES ANYWAY
 
1 - 7 of 7 Posts
Top