Nissan Forum banner
timing
1-4 of 4 Results
  1. General Frontier Discussion
    I'm replacing the distributor on my 99 nissan frontier and I can't get the ignition timing to 15 BTDC. With the old one I was able to set it to 15 BTDC but on my new one I can't retard it any further than 18 BTDC by turning the distributor. Any idea why this would be? Bad distributor...
  2. General Frontier Discussion
    I have a bad camshaft sensor in my old distributor on my 99 nissan frontier so I replaced it with a new one. With the old distributor I was able to get it to the right specks at 15 BTDC but with the new one I can't get it any more advanced than 18-20 degrees. This is causing poor gas millage...
  3. General Frontier Discussion
    I have a bad camshaft sensor in my old distributor on my 99 nissan frontier so I replaced it with a new one. With the old distributor I was able to get it to the right specks at 15 BTDC but with the new one I can't get it any more advanced than 18-20 degrees. This is causing poor gas millage...
  4. A34 2004-2008 Chassis
    I replaced my Water pump and in so doing believe I let the primary chain slip a tooth or two. So I pulled the timing case cover, probably letting the chain slip a little more when taking off the harmonic balancer. I'm replacing the primary chain and primary chain tensioner and guides while here...
1-4 of 4 Results
Top