Nissan Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. X-Trail
    I have had my car for almost 2 years now but will be having a baby so I am looking into the whole car seat side of things. Question 1.) Where are the child seat anchor/tether points in a 2008 X-Trail? Question 2.) Does this model have ISOFIX? Question 3.) Can either of these be installed by a...
  2. 1st Generation Rogue (2007-2013)
    So I came across this Nissan for $1500. Has roughly 155xxx miles. Needs some parts replaced, mostly suspension stuff. But has these codes: P0725 P0826 P1701 P0776 P0868 could there be one sensor/part that’s causing all these codes?
  3. 2nd Generation Frontier (2004-2021)
    Hello! I am looking to buy a used 2008 Frontier with the 4.0 v6 and 6 speed manual transmission. I have read a lot about the radiator leak and transmission failure on these trucks but they all seem to be restricted to the 5 speed automatic trans, and I have found no source that can confirm...
  4. 4th Generation Altima (2007-2012)
    For the past couple month I’ve been having this strange noise coming from my car. It only happens when the car is cold and hasn’t been started in a while. For example when I leave for work in the morning I don’t hear the rattling noise. But when I leave work and pull onto the street and start...
  5. General Maxima Discussion
    Hey Guys, i own a 2008 maxima. My transmission makes a grinding noise loud when first start up. It continues as you accelerate or break but not as loud. any suggestions?
  6. 4th Generation Altima (2007-2012)
    My car feels as if I am driving in low gear all the time. There is a slight hum when driving and I feel a little more vibration. This just started and the "Service Engine Light" is on. The OBD Code P0826 states Up and Down Shift Switch Circuit - mircocuts. I have a Continuous Variable...
1-6 of 6 Results