Nissan Forum banner

Search results

1-20 of 486 Results
Advanced Search
  1. CV axel install, and fuel problem..

    CA/E-Series Engines
    ecu is under the passenger seat
  2. Need RL3F01A Transmission Parts Source

    B11/B12/KN13 82-90 chassis
    Try these guys Transmission Parts - Transtar Industries Inc.
  3. Pops out of fifth under decent load

    B13 91-94 chassis
    here is the fix to your problem in a kit:5th Gear Parts :: Sentra / NX Parts (B13) 1991-1994 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com
  4. Timing belt or Timing chain on this 1993 Sentra ?

    B13 91-94 chassis
    Yes that is a B12. It will most likely have a ga16i which has a timing chain.
  5. B13 Rear Disc

    B13 91-94 chassis
    i'm not sure about the beam, i'm using the independent suspension.
  6. Battery light coming on and off

    B13 91-94 chassis
    Bad idea on a car with a ECU!!!!
  7. 4 or 5 speed manual, which years had them and deliver better MPGs?

    B13 91-94 chassis
    just changing the transmission will make it a 5-speed. straight swap.
  8. Getting dusted by a Nismo Z

    GA-Series Engines
    I'm sorry i even read your post...........
  9. MAF/ Alternator

    B13 91-94 chassis
    You shouldnt unplug anything with the engine running. I would try cleaning the IACV first.
  10. Wanted: 4WD tranny / Final Drive

    B11/B12/KN13 82-90 chassis
    OEM Surplus Homepage i think they have it
  11. B-13 SE-R rear brake bracket source?

    B11/B12/KN13 82-90 chassis
    did they custom fab them to sell?
  12. My "new" ride and first Nissan.

    B13 91-94 chassis
    its a small piece mounted near the blower motor, it will have like 4-6 wire plug. and should have 2 screws holding it in.
  13. B-13 SE-R rear brake bracket source?

    B11/B12/KN13 82-90 chassis
    ok, i guess i am not making myself very clear. sorry. I dont need the caliper brackets, i need the brackets that actually mount the caliper from the spindle to the caliper bracket. I'm just gonna fab them up myself. Thanks for helping me look.
  14. getting a new 5speed tranny....

    CA/E-Series Engines
    no the sr will not fit the ga. the easiest easiest way to tell if you are getting a 5-speed is to look at the gear shifter and see if it has 5 or 4 gears. your not going to be guaranteed it does not have a 5th gear pop out untill you drive it
  15. My "new" ride and first Nissan.

    B13 91-94 chassis
    its the blower resistor i believe.
  16. Water pump and maybe idler pulley rattle! (loud)!!

    CA/E-Series Engines
    you can always take one belt off at a time and crank the engine. If the noise goes away, then you know what to replace.
  17. clutch for b12 fit on ca18de?

    B11/B12/KN13 82-90 chassis
    no the clutch is smaller on a e-series, ga-series and will not fit the ca-series engines. the ca18de is a much bigger and has alot more hp so the clutch wouldn't even hold up.
  18. My "new" ride and first Nissan.

    B13 91-94 chassis
    160k is not really high to be changing the timing chain but if its making a rattle then you should think about doing it soon. its not a bad job, but it does require a few hours of tearing the whole front side (passenger side) of the engine. it has 2 chains and tensioners and guides. The IACV...
  19. B-13 SE-R rear brake bracket source?

    B11/B12/KN13 82-90 chassis
    I cant find the rear brake bracket to mount the calipers. Is there still someone who sells just the brackets for the conversion? Is the bracket that has the 4 bolts to hold the caliper. I have everything else. I can make these but i dont wanna if i can buy them already made, my time is limited...
  20. Campground Man's Build Thread

    B13 91-94 chassis
    That se-r is gonna look sweet, thats a very nice color choice. What is the name of it?
1-20 of 486 Results
Top