Nissan Forum banner

Search results

1-20 of 159 Results
Advanced Search
  1. Is there still a classified forum?

    Nissanforums AutoGuide Support / Help
    Hi guys, I'm wondering why I can't see the classifieds. I keep seeing "Could not connect to PhotoPost Classifieds databaseAccess denied for user 'nissanforums'@'10.%' to database 'nissanforums_com_cl'". I've been away for a few years.
  2. Chrome trim sucks

    Cosmetic Mods
    I hate the chrome trim on my 2011 Sentra 2.0. Only the logo and lettering should be chrome.
  3. The Header thread for the GA16DE

    GA-Series Engines
    Hotshot Header Vs Weapon R pics I've owned them both. Never got around to installing either one:P (laziness). Weapon R: HotShot:
  4. Spongy pedal after rear disc conversion?

    B13 91-94 chassis
    Just replaced the MC with a non-ABS U13 unit. The pedal feels better, more like how I remember a brake pedal should feel. It still feels like I have a touch too much pedal travel but the braking is solid now and more progressive instead of no resistance and then BAM.
  5. Spongy pedal after rear disc conversion?

    B13 91-94 chassis
    I checked the part # on the Fenco remanufactured MC I got and it's m52584 (NX2000)which is listed as 4-wheel ABS. I asked for the non-ABS unit and they sent the ABS one anyway:lame:
  6. Spongy pedal after rear disc conversion?

    B13 91-94 chassis
    I sent a NX2000 MC core for a rebuilt unit but IDK, maybe they sent me the wrong MC. In any case, if I try a new MC it will be the Altima one. However I found two different part #s 46010-2B100 and 46010-2B101. Both are for the U13 and both are non ABS but I don't know what the difference is...
  7. Spongy pedal after rear disc conversion?

    B13 91-94 chassis
    I rely on my mechanic for these kinds of jobs and he was certainly having me pump the pedal so I'll try bleeding them again. And I'll have to check that MC again, I think the top is black.
  8. Spongy pedal after rear disc conversion?

    B13 91-94 chassis
    Since my brake drums were on the outs I decided to pony up for a disc conversion. I ended up getting NX2000 rear spindle assemblies, rebuilt NX2000 rear calipers, rebuilt NX2000 MC, new SE-R Ebrake cables, SS lines and some blank rotors. I already have AD22VFs on the front so I pretty much have...
  9. exhuast

    GA-Series Engines
    2 inch. No bigger unless you go cams or turbo.
  10. Interesting Ebay find: $50 CAI

    GA-Series Engines
    Yea, the hole needs to be enlarged. I used a pair of aviation snips and a lot of grip strength.
  11. Interesting Ebay find: $50 CAI

    GA-Series Engines
    Finally installed This had been sitting in a closet forgotten for nearly a year but I FINALLY got around to installing it and what do you know, it fits. I did have to buy couplers because one of the couplers included was the wrong size, and they were rubber and I wanted silicone. Also needed to...
  12. B14 200sx se cluster to a B13 Coupe

    B13 91-94 chassis
    You already know how to back the wires out if the harness then?
  13. B14 200sx se cluster to a B13 Coupe

    B13 91-94 chassis
    You will still need to rearrange the wiring. The plugs will fit but the wires need to be moved to different positions on the harnesses. Also see if you can keep your original speedometer(for the odo). On the electric ones you can just swap out the whole speedometer but I don't know if that works...
  14. Do 1.6 rear hubs fit a 2.0 spindle assembly?

    Suspension & Brakes
    I have a set of spindle assemblies from an NX2000 that I'm using for a brake swap but one of the bearings is shot. Can I just swap the hub/bearings from my 1.6 drums into the 2.0 disc assemblies? I want to try this first before I go and buy new bearings.
  15. Header Question

    CA/E-Series Engines
    The HS header was notorious for touching the oil pan, especially with the B13s, and with the EGR tube needing to be modified to fit. http://www.nissanforums.com/ga16de-1-6l-engine/57180-hotshot-header-install.html
  16. Header Question

    CA/E-Series Engines
    I have a Weapon R 1.6 header that I'll be scrutinizing now to see if I can tell it apart from that QG one pictured. The down pipe looks the same to me. Wouldn't that be something, if the QG header fit the GA. The GA header market would be alive again. There are plenty of generic 2-piece SS...
  17. How to swap cluster for one with a tach!

    B13 91-94 chassis
    4 door GXEs also came equipped with a tach. There was a writeup on the old NissanPerformanceMag site about the cluster swap but the site no longer exists. I have the writeup so if you need it send me a PM.
  18. quick question

    Suspension & Brakes
    Only the fronts will fit. The rears are totally different.
  19. B13 electrical glitches?

    B13 91-94 chassis
    So I'm driving to work in the snow and the car's electrical system gets a little weird. The ebrake and battery light came on while I was driving and I noticed that my daytime running lights were not on. The car was still driving normally so I got into work. When I went home I noticed these...
  20. Kyb agx w/ Ground control

    Suspension & Brakes
    It's just wrapping the strut in duct tape so that the threaded sleeve doesn't move around, instead of using the rubber things that GC provides. The only other thing is to cut the spring perch off and bending the tabs so that the GC sleeve sits flat...
1-20 of 159 Results
Top