Nissan Forum banner

Search results

1-20 of 481 Results
Advanced Search
  1. 88 sentra sport coupe needs more power

    B11/B12/KN13 82-90 chassis
    Hi, If you really are into your vintage nissan and have serious intentions about giving it some grunt, I definitely can help. I have enough equipment to help you pull-off a complete CA18DET/FWD swap-over to include a freshly rebuilt AWD/FWD CA18DET engine with rebuilt turbocharger. Let me...
  2. New and need some help ca18det

    B11/B12/KN13 82-90 chassis
    You will need a KN13 pulsar for parts and a motorset with a wiring harness and ecu attached. Dee
  3. Lowering Srpings

    B11/B12/KN13 82-90 chassis
    Dude, why don't you just buy my old Intrax springs and save yourself the double work. The car sat low and it didn't bottom out and that was with the KYB struts. I promise not to kill you with pricing:fluffy: Dee
  4. CA18DET HP building ?'s

    CA/E-Series Engines
    Upgraded turbocharger, bigger injectors, better engine management, upgrade the fuel pump, and of course tuning. Dee
  5. Intercooler Question for Boost Boy

    CA/E-Series Engines
    That's a custom piece made from a huge truck core. Due to the fact that the B12 doesn't have a lot of frontal space, I've always used a 2 inch thick core. My car has A/C and P/S, so everything was set-up to accomodate this including the intercooler's piping. As for pics, I have pics of an old...
  6. Which trans fits a CA18DE?

    B11/B12/KN13 82-90 chassis
  7. Which trans fits a CA18DE?

    B11/B12/KN13 82-90 chassis
    I wouldn't try it, just too much work involved with trying to use the AWD unit. Just get you FWD tranny from one of the cars that cary the FWD CA (ie pulsar/stanza) and go from there. You'll come out better using the RWD's harness and ecu because not many people can wire-up the AWD harness and...
  8. Which trans fits a CA18DE?

    B11/B12/KN13 82-90 chassis
    Correction: If that engine is the engine you're planning to buy, then that's not a U11 bluebird engine. The engine you're looking at is a RNU12 attessa SSS CA18det with the AWD tranny. That is the engine you want to use, not the older CA18DET motor because you'll hate yourself as soon as you see...
  9. How much does a B12 weigh?

    B11/B12/KN13 82-90 chassis
    No problem champ; it's all good:). Dee
  10. Which trans fits a CA18DE?

    B11/B12/KN13 82-90 chassis
    My car is wrecked in the rear and I don't really have a lot of pics of my car as it is. The CA18DET engine is not cheap like it used to be because it's becoming to be a rarety in today's standards. Most importers know this and they're driving-up the prices on them to get as much as they can...
  11. Which trans fits a CA18DE?

    B11/B12/KN13 82-90 chassis
    1987-1989 nissan stanza. Dee
  12. How much does a B12 weigh?

    B11/B12/KN13 82-90 chassis
    Just over 2300 lbs in either 2dr or 4dr. That SE model is a about 120lb or so heavier (guesstimate). ANd that little Toyota Tercel looking bucket should be about the same less than the 2 or 4dr models. Can't say for the wagons, but I'm guessing around 2700lbs. Dee
  13. Hi, I#m new here. New member from Germany

    B11/B12/KN13 82-90 chassis
    The european market will pay for peformance and americans wanted cheap, practical grocery go-getters hence the reason why our little japanese-based sentras were given a much stronger power plant in their sunny cars (as an option). Keep in mind, the CA DOHC series engines were technologically...
  14. Why do people sleep on nissans....

    General Discussion
    Talk about waking the dead! Dee
  15. SR20DE swap

    CA/E-Series Engines
    You're about to make a lot of work for yourself. Why not just slap in the CA18DE which is natural for your KN13 chasis? If you're just going to put in an SR20DE to be one of the few the proud, then go for it. But if you're looking for performance, the CA18DE engine is strong enough to give most...
  16. Interested in B12 4WD?

    B11/B12/KN13 82-90 chassis
    I live in Miami where there's the port of Miami. Look into it and see what it would cost to ship this puppy to sunny Florida. I promise I will slap an CA18DET in ASAP:idhitit: ! Dee
  17. Interested in B12 4WD?

    B11/B12/KN13 82-90 chassis
    I want that little cart you got Daniel! And blown, I'llbe in touch with you real soon. Dee
  18. Interested in B12 4WD?

    B11/B12/KN13 82-90 chassis
    Most of the AWD CAs generally have low mileage, but the RWDs vary. If you really wanted this as a package deal, I can possibly get a friend to import the whole set-up for you. It will take a while though because he has a container already leaving Japan. As for stuff on ebay, at least with...
  19. Interested in B12 4WD?

    B11/B12/KN13 82-90 chassis
    Yeah, they run about 175hp at the flyweel from factory which not too shabby for a little motor on 5-7psi of boost. If youkeep it stock, then you should be just fine. It still would be nice to see an AWD CA18DET powered B12. I'd do it for the sheer experience and just to be different (as if that...
  20. Interested in B12 4WD?

    B11/B12/KN13 82-90 chassis
    I don't even play with the stock ECUs, however, it can be done. Back in the day, I was the first to be a guinea pig with Jim Wolf Technology in getting the pulsar ecus remapped for turbo. At first it was nightmarish resulting in some melted pistons, but it eventually worked itself out and I...
1-20 of 481 Results
Top