Nissan Forum banner

Search results

1-20 of 34 Results
Advanced Search
  1. Clean Bodykit

    Cosmetic Mods
    seems we all have different ways of preping and painting cars. I've always baked (out gasing) the urethane parts. Makes it so much easier for everything to stick when all the mold realease is off the parts. I mostly use a clear Elestic Primer to be exact. Although we have added and do add...
  2. Clean Bodykit

    Cosmetic Mods
    you dont get "urethane" paint. Its how its preped that matters. Urethane kits need to be baked first to get all the residue off from the mold making process. Then prep, then paint. An additive must be used to the paint to keep it flexible. This is how paint keeps from chipping on urethane.
  3. ZEX KITS- Anygood ????

    Forced Induction & Nitrous Oxide
    I think all zex stuff sux a$$. I had them and a few friends...I went through 3 purple boxes and my friend melted some zex plugs, the other....bad bottle valve.... Go NX...they say they make the best because they actually do.
  4. 2 questions

    B14 95-99 chassis
    running with higher wattage bulbs is ok. I've had mine in for 3 years. Although there is always the risk that the resistance will get too high and the heat will start to melt wires...with the fogs on too, this could be an issue. Although my gf drives with her fogs on with her lights in the...
  5. preparing for nitrous

    Forced Induction & Nitrous Oxide
    how about axles, burned piston,....thrown rod.....clutch....this is what Ive seen from people juicing up too much on stock engines and drive trains.
  6. ZEX Kit 55 shot

    Forced Induction & Nitrous Oxide
    dont get the zex plugs...they melt easy..I melted 6 in my buddies car the day we installed them..get some ngk's. I have them and almost anyone who uses lots of n2o uses them too....check the other nissan places like sentra.net.....
  7. Tried the nos........

    B14 95-99 chassis
    No one has even mentioned NX in here yet. I have a nx kit on my car. The best thing you can do is add a few things. 1. Buy the fuel pressure saftey switch from NX. It goes on any system and will save you....I promise you that. It goes in line after your fuel regulator and allows you to set...
  8. where to get this connector? (audio related)

    Nissan General Discussion Archive
    try the local dealerships. I got some from honda when I did my initial relocation. After a month of issues (was the solder) I went with stinger brand for all my battery/pwr connections.
  9. Projector issues...

    B14 95-99 chassis
    check all the wiring maybe something has come loose. Usually what I would do is get a multimeter and plug it into the harness and see what voltage is being read. If it is not near 12V then something is going wrong in the wiring.... my .02 guess
  10. Nitrous in a 1.6 L

    Forced Induction & Nitrous Oxide
    NX Go NX. Yeah zex may be easy, but all installs are easy. NX has the best solenoids and nozzles on the market. Add to that the coolest bottle opener and the only bottle warmer that is pressure related and not temp....cant go wrong.... oh yeah wet is the only way to go.....
  11. soon to be spraying QG18DE

    Forced Induction & Nitrous Oxide
    suggestions walbro pumps are loud...try to use some sound deadening material around the tank where the pump is mounted. Get some colder plugs and a window switch...save yourself from missed gears....did for me 2x.
  12. best set-up

    Forced Induction & Nitrous Oxide
    N02 not NOS First of NOS is a brand made by Holley....Get NX (nitrous express). best stuff on the market, SEMA award winning company and the best customer service around!!!
  13. battery relocation kit?

    B14 95-99 chassis
    easy as pie I did this in my civic, but I got an Optima Dry Cell Red Top, so I didnt have to worry aobut corriosion, spilling or acids, etc. I put it near the right hand well and built an enclosure around it. My pwer cables are 0/1 AWG. Ground is in the bottom of my spare tire well, and the...
  14. nitrous and manual tranny

    Forced Induction & Nitrous Oxide
    hmmm So your gonna run some N20....awesome!! An Act stage 1....So what is the letter designation for the clutch....Mine is a HDR4...basically it feels like stock, but grabs like a mofo....so to me that is like stage 4. I guessing you have a HD00. I always recommend people to ge the HDSS...it...
  15. nitrous and manual tranny

    Forced Induction & Nitrous Oxide
    yes this is true In my civic I never spray initially in first gear from the line or at low rpms. My window switch turns on at 4k and that is good for me. Add to this the more you are shooting the harder it is on your clutch. My stock clutch starting slipping shortly after I started adding...
  16. MN peeps dont go here...

    Midwest/Great Plains
    just in case you were thinking of looking at a toyota by chance.... http://www.mnsportcompacts.net/forum/topic.asp?TOPIC_ID=1298
  17. still need Halo help!!

    B14 95-99 chassis
    Do the brights come on w/ the headlights when switched only to headlight? Or when in bright they are both on? If it's the second, remove the blue cap on the end of the lonely connector and you will have single brights and single dims. Otherwise send my gf an email [email protected] and...
  18. Need Immediate Help

    B14 95-99 chassis
    forget the damn shop. hack that shit off and use new bolts. be sure to get stainless and in a hard grade, nothing soft. Don't want them to bend... ;)
  19. Need Immediate Help

    B14 95-99 chassis
    use a torch and heat it up always works for me
  20. Need Electrical Guru

    B14 95-99 chassis
    i used a tester and dvm. my tester can inject +/- 12v
1-20 of 34 Results
Top