Nissan Forum banner

Search results

1-20 of 392 Results
Advanced Search
  1. tein pillow ball mounts

    Suspension & Brakes
    Good to know. Thanks, I was thinking about getting some GC C/C plates.
  2. tein pillow ball mounts

    Suspension & Brakes
    Not sure if the GC plates would work right with the Tein coilovers. The spring i.d. is different between the two.
  3. Tien Pillowball mounts

    Suspension & Brakes
    All 4 depends on where you buy them. I had to buy the front pair and the rear pair seperatly. The fronts only have camber adj. Yes, your bar will fit.
  4. If someone were to build a 4-1 GA header. Questions

    Naturally Aspirated
    Lets say I have a "friend" that can build high quality headers and wants to do a 4-1 for the GA. "He" has a few questions. How does one determine proper primary diameter and leangth? I know it depends on where you want the power, but lets say we want it 4500RPM and up. From what I gather on...
  5. Sentra Carbon Fiber Trunk Group Buy !

    Group Buys
    Interested, would like to see pics.
  6. suspension question

    Suspension & Brakes
    B14 rear alignment specs dont change when you lower the car. Its a solid axle, it cant change.
  7. Tein SS - What's your setting

    Suspension & Brakes
    Dampers: 8-front, 10-rear Height: .5" Higher than the instrutions recommend front and rear.
  8. one more tein question

    Suspension & Brakes
    Get the Teins. The KYB/AGX setup can never be as smooth as the Tein setup because the Tein setup has shortened damper cases. I have the SS kit and when its set to the same damper setting as the Basic are stuck with(not a bad thing though), the ride is really nice even on some of the shit roads...
  9. "Sport"/Street cage. Look...

    B14 95-99 chassis
    Little more info: A coworker of mine built the cage for me under my direction. Its a 4 point cage built out of 1 3/4" X .120" ERW with 4"X4"X1/4" mounting plates. Except for design(shape) its built the same as an AutoPower cage. I dont think this cage would be leagle for SCCA racing due to the...
  10. "Sport"/Street cage. Look...

    B14 95-99 chassis
    Unfinished, but in(my car).
  11. Slotted rotors..Rice????

    Suspension & Brakes
    What advantage do you see in using them?
  12. Slotted rotors..Rice????

    Suspension & Brakes
    What do you think?? Take this into consideration: Xanavi GT500 Skyline
  13. All the B14 coilovers I can find. EXPERT opinions wanted.(Long)

    Suspension & Brakes
    You need to get the mounts as well. The mounts are what have the camber adjustment.
  14. All the B14 coilovers I can find. EXPERT opinions wanted.(Long)

    Suspension & Brakes
    The SS kit doesnt come with the camber plates(pillowball mounts). You have to buy them seperatly( The Nissan JN15 VZ-R ones are what you want). For the amount of drop you want the SS should suit you fine.
  15. B&G Coilovers VS TEIN SS

    Suspension & Brakes
    Tender springs dont really affect the cars handling, they just hold the main spring in place when the suspension is fully extended. I dont think there is anything wrong with those rates.
  16. B&G Coilovers VS TEIN SS

    Suspension & Brakes
    Very good post. One question though. On your weights... Front 61.6% Rear 48.0%, do I not understand corner weights or is that number off??? 109.6 % seems weird to me. BTW I come up with 2988 total. Good alignment specs, If It were me I would run a little more neg camber. I have ran -1.7deg...
  17. Project 200SX

    NPM Project Cars
    Higher octane only makes a difference if you want/need to push the detontion edge up higher. It wont make a diff on a car that is not tuned with parts/settings that may get you closer to detonation. Btw, thanks again for answering my questions. Now if only I could get off my butt and get the...
  18. I just dropped my car...what a mess!!!

    Suspension & Brakes
    B13 struts wont help unless you have coilover sleeves. Do a search on it.
  19. Project 200SX

    NPM Project Cars
    Thanks Mike. I understand your descritption of loads and stresses on a motor. I have somewhat studied that aspect of engines. I only asked that question in hopes of reafirming my own thoughts, which you did. Did I mention 93 octane always goes into the tank and 94 isnt hard for me to get if...
  20. I just dropped my car...what a mess!!!

    Suspension & Brakes
    As a former Sportline owner(B14) I can assure you that Mike(morepower2) is correct. Travel is nearly non-exsitant.
1-20 of 392 Results
Top