C/F 200sx OEM Trunks. - Nissan Forum
Group Buys For arranging and posting group purchase deals

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 50 Old Feb 9th, 2004, 11:04 PM Thread Starter
G14 CLASSIFIED!!!!
 
ScorchN200SX's Avatar
 
Joined: Aug 2002
Location: SEAWA
Posts: 763
Thumbs up C/F 200sx OEM Trunks.

Alrighty, Since things are moving along nicely I am working out the intial group buy to get these produced.

C/F is going to be no more than 500$ shipped.

Fiberglass is going to be 375$ shipped.

I need 15 people who what this to happen to email [email protected] with half down to fund the molding and their pieces. Once the molds are complete Then the first one who deposited the downpayment will recieve a conframation Email from me with a request for the remainder of the money and it will be shipped to them. (And So On!)

Like I said this Is for an OEM Fitment Trunk for the B14 200Sx. It will have 1/4 skeleton in inside with a glossy C/F weive finish or the optional Fiberglass in a black gel coat. All of the Mounting points for the latch and trunk lifts will be reinforced.

Thanks for the support!
Mike Roberts
www.syndicatekustomz.com



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SKZ Garb now availible! Get your Hats, stickers, and soon t shirts and hoodies.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ScorchN200SX is offline  
Sponsored Links
Advertisement
 
post #2 of 50 Old Feb 9th, 2004, 11:34 PM
Have I Hit 12's Yet?
 
NotAnotherHonda's Avatar
 
Joined: Aug 2003
Location: Jax Bch/Tallahassee, Florida
Posts: 5,326
DAMMMNNNNNNN....you dont have any pics of your work, huh

95 200sx se. sr20de, gt28r, bb manifold, forge fmic, greddy bov and bc, tial 38mm, walbro 255, apexi tt, 3" exhaust with magnaflow, 3" downpipe, jgy clutch flywheel and fuel rail, msd 50#'s, cobra maf, jwt ecu and s4's, nismo fpr, autometer, nissport adaptors, fal pushers, ur pulley, m/t 22x8x15 et drags.
NotAnotherHonda is offline  
post #3 of 50 Old Feb 9th, 2004, 11:41 PM Thread Starter
G14 CLASSIFIED!!!!
 
ScorchN200SX's Avatar
 
Joined: Aug 2002
Location: SEAWA
Posts: 763
Pics will be up at the end of the week of the prototype once I get a layer of primmer on it.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SKZ Garb now availible! Get your Hats, stickers, and soon t shirts and hoodies.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ScorchN200SX is offline  
Sponsored Links
Advertisement
 
post #4 of 50 Old Feb 9th, 2004, 11:45 PM
Have I Hit 12's Yet?
 
NotAnotherHonda's Avatar
 
Joined: Aug 2003
Location: Jax Bch/Tallahassee, Florida
Posts: 5,326
hell yea...but damn..i have the oem spoiler, and want to kkeep it...goofy huh?

95 200sx se. sr20de, gt28r, bb manifold, forge fmic, greddy bov and bc, tial 38mm, walbro 255, apexi tt, 3" exhaust with magnaflow, 3" downpipe, jgy clutch flywheel and fuel rail, msd 50#'s, cobra maf, jwt ecu and s4's, nismo fpr, autometer, nissport adaptors, fal pushers, ur pulley, m/t 22x8x15 et drags.
NotAnotherHonda is offline  
post #5 of 50 Old Feb 10th, 2004, 12:05 AM Thread Starter
G14 CLASSIFIED!!!!
 
ScorchN200SX's Avatar
 
Joined: Aug 2002
Location: SEAWA
Posts: 763
Quote:
Originally Posted by NotAnotherHonda
hell yea...but damn..i have the oem spoiler, and want to kkeep it...goofy huh?
Not really, Most drill their own holes and use ruber gromets on the insde with large washers to disapate the down force to help keep them from damageing the peice.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SKZ Garb now availible! Get your Hats, stickers, and soon t shirts and hoodies.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ScorchN200SX is offline  
post #6 of 50 Old Feb 10th, 2004, 01:55 AM
WHOOT!
 
xt_out's Avatar
 
Joined: Jun 2003
Location: Spokane, WA
Posts: 1,286
wow mike. way to support the nissan market!!!
i suspect i'll see you at the nw nissan bbq mar 20th right?
xt_out is offline  
post #7 of 50 Old Feb 10th, 2004, 02:01 AM Thread Starter
G14 CLASSIFIED!!!!
 
ScorchN200SX's Avatar
 
Joined: Aug 2002
Location: SEAWA
Posts: 763
Should be there!!!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SKZ Garb now availible! Get your Hats, stickers, and soon t shirts and hoodies.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ScorchN200SX is offline  
post #8 of 50 Old Feb 10th, 2004, 01:24 PM Thread Starter
G14 CLASSIFIED!!!!
 
ScorchN200SX's Avatar
 
Joined: Aug 2002
Location: SEAWA
Posts: 763
List of people..............

SR Forum
1 kesi24
2 mYseRgOesvrOOm
3 Jason JGY Customs.
4 Mike Kojima
5 Pearl200sx
6 JIMMYSX9


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

SKZ Garb now availible! Get your Hats, stickers, and soon t shirts and hoodies.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by ScorchN200SX; Feb 24th, 2004 at 11:20 PM.
ScorchN200SX is offline  
post #9 of 50 Old Feb 10th, 2004, 03:25 PM
Have I Hit 12's Yet?
 
NotAnotherHonda's Avatar
 
Joined: Aug 2003
Location: Jax Bch/Tallahassee, Florida
Posts: 5,326
Quote:
Originally Posted by ScorchN200SX
Not really, Most drill their own holes and use ruber gromets on the insde with large washers to disapate the down force to help keep them from damageing the peice.

nah..what i was sayin was...wouldnt it be goofy to have a stock wing and a CF trunk? ide have to go buy a CF wing to match...and i HATE wings...and i dont like the non-spolier'ed 200sx... i had it without one for a year, and it looks sooo much better with it...so i am stuck here...

95 200sx se. sr20de, gt28r, bb manifold, forge fmic, greddy bov and bc, tial 38mm, walbro 255, apexi tt, 3" exhaust with magnaflow, 3" downpipe, jgy clutch flywheel and fuel rail, msd 50#'s, cobra maf, jwt ecu and s4's, nismo fpr, autometer, nissport adaptors, fal pushers, ur pulley, m/t 22x8x15 et drags.
NotAnotherHonda is offline  
post #10 of 50 Old Feb 10th, 2004, 05:20 PM
Please Shift Here
 
Ninety-Nine SE-L's Avatar
 
Joined: May 2002
Location: Orlando, FL
Posts: 6,696
Quote:
Originally Posted by NotAnotherHonda
nah..what i was sayin was...wouldnt it be goofy to have a stock wing and a CF trunk? ide have to go buy a CF wing to match...and i HATE wings...and i dont like the non-spolier'ed 200sx... i had it without one for a year, and it looks sooo much better with it...so i am stuck here...
Paint the lid to match the body and the spoiler.





To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Ninety-Nine SE-L is offline  
post #11 of 50 Old Feb 10th, 2004, 05:24 PM
Have I Hit 12's Yet?
 
NotAnotherHonda's Avatar
 
Joined: Aug 2003
Location: Jax Bch/Tallahassee, Florida
Posts: 5,326
paint over caron fiber? shhiiiiiiiit...im not doin it for the weight savings, although that is a benefit

95 200sx se. sr20de, gt28r, bb manifold, forge fmic, greddy bov and bc, tial 38mm, walbro 255, apexi tt, 3" exhaust with magnaflow, 3" downpipe, jgy clutch flywheel and fuel rail, msd 50#'s, cobra maf, jwt ecu and s4's, nismo fpr, autometer, nissport adaptors, fal pushers, ur pulley, m/t 22x8x15 et drags.
NotAnotherHonda is offline  
post #12 of 50 Old Feb 10th, 2004, 05:35 PM
Please Shift Here
 
Ninety-Nine SE-L's Avatar
 
Joined: May 2002
Location: Orlando, FL
Posts: 6,696
then paint the spoiler grey.





To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Ninety-Nine SE-L is offline  
post #13 of 50 Old Feb 10th, 2004, 05:39 PM
Have I Hit 12's Yet?
 
NotAnotherHonda's Avatar
 
Joined: Aug 2003
Location: Jax Bch/Tallahassee, Florida
Posts: 5,326
Quote:
Originally Posted by 1997 GA16DE
then paint the spoiler grey.
yikes...i guess ide either have to lose the spoiler or get a CF wing...a really low one...if i was to buy the trunklid

95 200sx se. sr20de, gt28r, bb manifold, forge fmic, greddy bov and bc, tial 38mm, walbro 255, apexi tt, 3" exhaust with magnaflow, 3" downpipe, jgy clutch flywheel and fuel rail, msd 50#'s, cobra maf, jwt ecu and s4's, nismo fpr, autometer, nissport adaptors, fal pushers, ur pulley, m/t 22x8x15 et drags.
NotAnotherHonda is offline  
post #14 of 50 Old Feb 10th, 2004, 10:45 PM
Oh, Herro!
 
samo's Avatar
 
Joined: Apr 2002
Location: Portland, OR
Posts: 2,337
Send a message via AIM to samo
Or, get Mike's CF drift-style wing .

The oldest of the old-school!
samo is offline  
post #15 of 50 Old Feb 10th, 2004, 11:11 PM
Have I Hit 12's Yet?
 
NotAnotherHonda's Avatar
 
Joined: Aug 2003
Location: Jax Bch/Tallahassee, Florida
Posts: 5,326
Quote:
Originally Posted by samo
Or, get Mike's CF drift-style wing .
where can i see what it looks like

95 200sx se. sr20de, gt28r, bb manifold, forge fmic, greddy bov and bc, tial 38mm, walbro 255, apexi tt, 3" exhaust with magnaflow, 3" downpipe, jgy clutch flywheel and fuel rail, msd 50#'s, cobra maf, jwt ecu and s4's, nismo fpr, autometer, nissport adaptors, fal pushers, ur pulley, m/t 22x8x15 et drags.
NotAnotherHonda is offline  
Reply

  Nissan Forum > Marketplace > Group Buys

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Nissan Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
B14's with OEM style c/f hoods.... Shawn Cosmetic Mods 27 Mar 22nd, 2004 10:00 PM
15" OEM Rims for 200SX same as Sentra?? Bach42T B14 95-99 chassis 6 Dec 30th, 2003 09:34 PM
99 200sx oem part# GTRsentra B14 95-99 chassis 6 Dec 9th, 2003 11:29 PM
OEM B14 200sx C/F trunk. ScorchN200SX Group Buys 10 Nov 6th, 2003 08:20 AM
funny convo!.. hope you... Niss200SXGTR Off Topic 6 Jul 4th, 2002 12:18 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome