» Wheel & Tire Center

» Sponsors
» Sponsors
Go Back   Nissan Forums: Nissan Forum > Nissan Models > Nissan Z > Z33 350Z 2003+
Register Home Forum Gallery eBay Marketplace Active Topics Search Today's Posts Mark Forums Read

Z33 350Z 2003+ 2003+ 350Z VQ35DE - Engine and Chassis Discussion

Please Visit our Site Sponsors

SolsticeForum.com is the largest Nissan Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old Jul 25th, 2008, 10:24 PM   #1 (permalink)
maxpusher
NissanForums Newbie
 
Join Date: Jul 2008
Posts: 2
Throttle Body Cleaning... Now CEL

Hello,
I did a throttle body cleaning yesterday. The car has about 53,000 miles. I saw the DIY video but was not aware that our throttle bodies were this sensitive.

I did the accelerator pedal, throttle valve, and idle air learning procedures but still get a high idle CEL. When I first tried it, I got a CEL right after performing the procedure. So I pulled the battery and did it again.

The CEL went away but the idle was alittle high. I drove around 50 miles with no CEL but the idle was around 950 rpm. I turned off the car and started again and am getting the CEL again. I am in the process of performing another restart.

What do you guys recommend I do? I still have my original warranty on the car. Could the TB be covered under warranty? I would like to hear your opinions. Thanks.
maxpusher is offline   Reply With Quote
Sponsored Links
Advertisement
 

Old Jul 28th, 2008, 02:31 PM   #2 (permalink)
Spongerider
Power FC Z32
 
Spongerider's Avatar
 
Join Date: Nov 2002
Location: Huntington Beach, Ca.
Posts: 1,948
Send a message via AIM to Spongerider
Disconnect battery wait 30 seconds. Start car and let warm up for 15 minutes.
Spongerider is offline   Reply With Quote
Old Jul 28th, 2008, 09:01 PM   #3 (permalink)
maxpusher
NissanForums Newbie
 
Join Date: Jul 2008
Posts: 2
I got the relearn procedure to work yesterday. Here is what I did different then the instructions mentioned above. Hopefully, other people don't have the same problem.

First off, the clutch does not need to be pushed in for the 6mt.

I disconnected the battery for about 10 hours. The Accelerator Pedal Release Position Learning and the Throttle Valve Closed Position Learning are self explanatory.

For the Idle Air Volume Learning, I started the engine and drove around for 15 minutes. Before, I was just warming up the engine and heard from other people that this does not work.

Then, I followed the step until #5 of the instructions above. Before, I pressed and released the pedal 5 times within 5 secs and afterwards waited 7 secs and proceeded to the next step. Yesterday, I waited the full 5 seconds and waited another 7 secs.

Then, I pressed the pedal for 20 secs. After 20 secs, the CEL stopped blinking and was on. I released the pedal and turned the engine on within 3 secs and it started to idle like normal. I drove the car today and it seems like the ECM didn't forget what it learned.
maxpusher is offline   Reply With Quote
Reply

  Nissan Forums: Nissan Forum > Nissan Models > Nissan Z > Z33 350Z 2003+



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBadvanced CMPS v3.1.0

All times are GMT -5. The time now is 10:41 PM.


Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0
© 2006 NissanForums.Com