» Wheel & Tire Center

» Sponsors
» Sponsors
Go Back   Nissan Forums: Nissan Forum > Nissan Models > Nissan Z > Z32 Chassis 300ZX
Register Home Forum Gallery eBay Marketplace Active Topics Search Today's Posts Mark Forums Read

Z32 Chassis 300ZX 1990-1996 300ZX Z32 Chassis Discussion

Please Visit our Site Sponsors

SolsticeForum.com is the largest Nissan Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old Apr 5th, 2004, 11:06 AM   #1 (permalink)
kevrock529
Sorta-Newbie
 
Join Date: Mar 2004
Location: Cape Coral Florida
Posts: 15
Send a message via Yahoo to kevrock529
1993 Twin Turbo with an 89 engine block?

I recently purchased a 1993 TT, which runs great. I had to replace some minor things brakes, rotors, slave cylinder. Well, I also had a small leak in the power steering pump. I didnt have time to do this myself. Well, my car has been in the shop for 2 weeks. And the mechanic is trying to match up the pump. Apparently, he bought a 93 tt pump twice and the pulleys are a 4 groove but my main pulley is a 3 groove. So it isnt lining up. They dont want to take everything off to verify the vin # on the block but they think the block is an 89 motor with all the turbos and what not added on. Has anyone heard of this or seen this done?? They are saying there were little changes in the block??
kevrock529 is offline   Reply With Quote
Sponsored Links
Advertisement
 

Old Apr 5th, 2004, 08:09 PM   #2 (permalink)
morepower2
Icy Hot Stunta
 
morepower2's Avatar
 
Join Date: Apr 2002
Location: Cypress, Ca
Posts: 2,366
Quote:
Originally Posted by kevrock529
I recently purchased a 1993 TT, which runs great. I had to replace some minor things brakes, rotors, slave cylinder. Well, I also had a small leak in the power steering pump. I didnt have time to do this myself. Well, my car has been in the shop for 2 weeks. And the mechanic is trying to match up the pump. Apparently, he bought a 93 tt pump twice and the pulleys are a 4 groove but my main pulley is a 3 groove. So it isnt lining up. They dont want to take everything off to verify the vin # on the block but they think the block is an 89 motor with all the turbos and what not added on. Has anyone heard of this or seen this done?? They are saying there were little changes in the block??
The Z32 started as a 90 my but some prod dates were in 89. All the blocks were the same through the production. The 90-93 Z's have hydralic hicas and the 94-96 is elelctirc hicas. The electric hicas cars have a 3 rib belt and a shorter ps pump. Maybe yours is a 94 model year with electric hicas but a 93 production date?

Mike
__________________
There can only be one Icy Hot Stunta, Don't Hate.

Master of Level 9
morepower2 is offline   Reply With Quote
Old Apr 6th, 2004, 09:14 AM   #3 (permalink)
kevrock529
Sorta-Newbie
 
Join Date: Mar 2004
Location: Cape Coral Florida
Posts: 15
Send a message via Yahoo to kevrock529
Quote:
Originally Posted by morepower2
The Z32 started as a 90 my but some prod dates were in 89. All the blocks were the same through the production. The 90-93 Z's have hydralic hicas and the 94-96 is elelctirc hicas. The electric hicas cars have a 3 rib belt and a shorter ps pump. Maybe yours is a 94 model year with electric hicas but a 93 production date?

Mike
THanks mike! where would the electric hicas pump be? For some reason, the mechanic said the production date was oct 92?? I do know the sale date was 12/93 with 24 miles on it from the dealer. This is a total mystery!! I should hear soon if the 89 pulley fits. I dont know if he pulled that from the vin. If it was produced in 92, could they have converted the Hicas over to electric? I am assuming the Hicas is working as the light goes off after it is started...One more question for you Mike. The black sticker/rubber piece right under the rear spoiler and above the tail lights needs to be completely replaced. Can I get this at a nissan dealership? any idea on cost??

Last edited by kevrock529 : Apr 6th, 2004 at 11:30 AM.
kevrock529 is offline   Reply With Quote
Old Apr 7th, 2004, 04:51 PM   #4 (permalink)
morepower2
Icy Hot Stunta
 
morepower2's Avatar
 
Join Date: Apr 2002
Location: Cypress, Ca
Posts: 2,366
Quote:
Originally Posted by kevrock529
THanks mike! where would the electric hicas pump be? For some reason, the mechanic said the production date was oct 92?? I do know the sale date was 12/93 with 24 miles on it from the dealer. This is a total mystery!! I should hear soon if the 89 pulley fits. I dont know if he pulled that from the vin. If it was produced in 92, could they have converted the Hicas over to electric? I am assuming the Hicas is working as the light goes off after it is started...One more question for you Mike. The black sticker/rubber piece right under the rear spoiler and above the tail lights needs to be completely replaced. Can I get this at a nissan dealership? any idea on cost??
The electric hicas doesnt have the big control solenoids under the hood and doesnt have the additonal lines going to the rear of the powersteering pump. Its nearly imposible to convert to the electric hicas without spending tons of money. The elecitc hicas is purely electric with no connection to the power steering system at all.

Mike
__________________
There can only be one Icy Hot Stunta, Don't Hate.

Master of Level 9
morepower2 is offline   Reply With Quote
Reply

  Nissan Forums: Nissan Forum > Nissan Models > Nissan Z > Z32 Chassis 300ZX



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DRAIN PLUG for the ENGINE BLOCK HardlineFan GA16DE 1.6L Engine 14 Aug 13th, 2003 01:51 AM
SR20DE - internal engine problem after head decking signat New Member Forum 1 Aug 4th, 2003 11:58 AM
Twin turbo DATSUN Z engine ?!?!? Blackbob Forced Induction & Nitrous Oxide 20 Mar 31st, 2003 10:44 AM
VG30 Turbo engine specs? 87Truck Forced Induction & Nitrous Oxide 1 Oct 3rd, 2002 11:39 PM
Combustion chamber prep for turbo, 300whp Bluebird engine. PatScottAKA99XE Forced Induction & Nitrous Oxide 5 Jun 12th, 2002 04:57 PM

Powered by vBadvanced CMPS v3.1.0

All times are GMT -5. The time now is 11:20 PM.


Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0
© 2006 NissanForums.Com