altimanet

I recently joined your forum and was hoping you could help me with a good website to get the following for 97 altima

- FL DRIVE SHAFT-REMFG
- OIL PRESS SENDER (not sure what this is)
- FRL LOWER CONTROL ARM
- SERPENTINE BELT

mrnoname

you can get all those item from your local auto parts store.

KA24Tech

I really like the support the people down at Courtesy Nissan provide http://www.courtesyparts.com/
The oil pressure sending unit depends on whether you have the gauge or light but check with Courtesy on that.
The front left axle can be sourced locally in Des Moines from Hummel's Nissan or a quality remanufacturer/rebuilder.
As for the lower control arms, are they required to be replaced because of the bushings or are they physically damaged? I ask because if the bushings are bad you can use Whiteline (part no. KCA 303) or Energy Suspension (part no. 7.3111) urethane replacement. It is some work to get the old bushing off but well worth the trouble since the bushings are only about $60 for both replacement bushings


There are two belts for the 93-97 Altimas. One for the A/C and one for the PS Alt. and Water Pump. I would replace both of them.

Troy

__________________
SHIFT_Happiness
1992 S13 240SX SE Fastback KA24DE 5 spd - Type X Aero & Seibon Carbon Hood & Hatch -soon GT28RS
1993 U13 Altima SE KA24DET 5 spd w/ Nismo LSD - A high hp FWD can be fun (GT30R Turbo inside)
1990 Z32 300ZX VG30DETT 5 spd - 600HP & Very Civilized (working on twin GT28RS turbos)
Still trying to import a 1988 R31 Skyline GTS-R w/ RB20DET-R - only 800 produced (legal under show/display regs)

Agoudine

When I buy parts online,I usually go to yahoo and search for my part.
Foe example:" Nissan altima fuel filter". It gives me a lot of web sites so you can choose the best quality and price. If you have no idea what your part looks like and what ti does,there is a picture and some times a little of explanation You can also use www.autozone.com and other autopart store web sites.