TX Heat

Hey what's up this is my first post here.

I just bought a 87 Nissan Pickup about two months ago. It's a four cylinder regular cab. I've got some dumb questions so bare w/ me.

First off, does anyone know the specs to these. It says Z24 electroinjection in the engine bay.

Second. When I buy a distributor cap for this truck, will it come w/ screws. The current cap is clamped on.

Last. Does anyone know where I can get some wider rims. Nothing fancy, just want to put a little bit bigger tires on there. They feel like bike tires.

Thanks for the help.

aaronford

The engine is a Z24 (eight spark plug) throttle body injected engine. Not sure about the cap. Wheels can be got for cheap off of eBay. You are looking for a 6 on 6.5 pattern. Other trucks use this pattern: some chevys , Toyota, Mazda, Mitsubishi. Stay with aftermarket on these cause the oems may not swap so easily. If your gonna go OEM, stay with Nissan, but no late 70's/early 80's. The center hole is too small. As far as tires, 235/60/15s fit my 95 2WD fairly well. I have heard that 31X10.50s will fit under the 4X4 without rubbing too bad. Aaron

__________________
Aaron Ford
95 2WD Nissan PU E
2002 Oldsmobile Intrigue GX
"The hard part about playing chicken is knowing when to flinch" Scott Glenn in The Hunt for Red October

himilefrontier

An interesting fact about this engine is that it is derived from the old L series engine that first saw use in the 1968 510 and pickup. So, some parts may interchange from these vehicles.

__________________
1998 Nissan Frontier XE/2wd/5spd 1 owner, 264k miles
1985 Olds Cutlass, 350 Chevy, owned for 14 years
WANTED: 1968-1973 Datsun 510 or 1991-1994 Sentra SE-R
http://www.myspace.com/junkyardengineer

Pathfinder4X4

I have the Nissan chrome 15 X 6.5 rims on my 1987 pathfinder and I put a set of swampers 34 X 10.50 X 15LT and it did not hit any of the fender wells. I did put a 3 inch body lift on it. It will rub on the inside of the frame if I turn the wheels all the way to the right or left.