dookie

looks like i'll be saving up for some AGX's with pro-kits and some motivational rear mounts, don't forget the koni bumpstops.

 

96BlkSE-R

I didn't use the Koni bumpstops. I chose to get new original bumpstop/boot combos from Mother Nissan, then cut them per the directions included with the Pro-Kit springs. They say to cut 20mm out of the bumpstop, which is exactly 1 section off both the front & rear Nissan B14 stops. The only thing is that you end up with 2 separate pieces - a bumpstop & a boot - after it is cut. But, the system is working flawlessly on my almost stock-looking car - no rubbing, bottoming - nothing. And I'm running 205/50's on my stock SE-R rims.

Good luck...

And, the Motivational mounts are awesome on the rear, since they add 1" of much-need travel...