B14_Stealth

Ok , if this topic has been covered before i appologize but i need your opinions, my current setup is .. hehe dont laugh ..
stock struts&shocks and Sprint springs.

The reason why i got the Sprint springs was cause they lowered a lot ( front and back 2" drop) , my mistake i know that but anyway, i might be getting KYBs GR-2 for front and the back and was thinking of swapping the springs at the same time.
I pretty much narrowed it down to two choices at the moment , considering my budget. It is either:

TEIN Springs:
front: - 2.4"
back: - 1.1"

or
Arospeed Coilovers:
front & back adjustable between 0" - 4".

I got the alligment done about a year ago and the guy told me to get a camber kit, so i did, now.. .if i use TEIN springs at the drop is 2.4" in the front, should i get a new camber kit?

I appreciate any help anybody can provide.

 

iron tomm

Go to our forums Suspension & Brakes section and check out the stickies, there are tons of info (especially for our B14s) on all types of springs/struts/shocks/coilovers/etc.

IMO, you should have saved up and just got the Teins in the first place.

__________________
MOFO>YOU

B14_Stealth

hehe, yea i know but back 2 years ago they were expensive
well thanks for the info

B14_Stealth

ok i found a thread about the coilover setups, so Arospeed coilovers are crap according to the post
http://www.nissanforums.com/showthread.php?t=51259

..so how are the TEIN springs, pretty good right?
Would i have to change the camber kit if i wanted to install those since the front is 0.4" more lower than my Sprint Springs

here are the springs that im talking about
http://cgi.ebay.com/ebaymotors/ws/eB...MEWA%3AIT&rd=1

jeffinbham

for the love of god, do not get the gr-2's. just save your money and do it right, there is plenty of info about the best suspension setups for different applications on the b14.

__________________
96 200sx se-r
tein basics with pillow ball mounts, enkei 18s, b&m short shifter, 2.25" exaust with magnaflow, act street disc and HD pressure plate, aem cai, prothane motor mounts, topspeed header

 

B14_Stealth

my friend had GR-2s and they were fine on his B14, also ive read few threads last night and Ive seen KYBs GR-2s mentioned in the good way. Would it make a difference if i got the AGXs?

Token Moron

u really need to do some research, because u obviously dont know that GR-2's are not performance!! they are just OEM replacements. AGX's are designed for shortening which is what u want. Dont even consider Arospeed coilovers, theres a reason they cost 80$! Want a good setup? get AGX shocks/struts and ground control coilovers...good setup for relatively cheap

__________________
91 se-r : sr20det= the beast
96 sentra : ga16de= pimpness
00 frontier : ka24de= tow truck
01 sentra : gq18de= stock mofo

B14_Stealth

i know about Arospeed coilovers , i found out about them last night